Cypress Semiconductor Corp
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MB90F498GPMCR-G-TE2

MB90F498GPMCR-G-TE2

Introduction

The MB90F498GPMCR-G-TE2 is a microcontroller belonging to the category of embedded systems. It is widely used in automotive applications due to its high-performance characteristics and reliability. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MB90F498GPMCR-G-TE2.

Basic Information Overview

  • Category: Embedded Systems/Microcontrollers
  • Use: Automotive Applications
  • Characteristics: High-performance, Reliability
  • Package: LQFP (Low-profile Quad Flat Package)
  • Essence: Advanced Control and Processing Capabilities
  • Packaging/Quantity: Typically packaged in reels of 250 or 500 units

Specifications

  • Architecture: 16-bit
  • Clock Speed: Up to 80 MHz
  • Memory: Flash memory, RAM
  • I/O Interfaces: UART, SPI, I2C, CAN
  • Operating Voltage: 3.3V
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

The MB90F498GPMCR-G-TE2 has a total of 100 pins, including power supply, ground, I/O, and communication interface pins. The pinout diagram and detailed pin configuration can be found in the official datasheet provided by the manufacturer.

Functional Features

  • Advanced Control Unit for Automotive Applications
  • Real-time Data Processing
  • Enhanced Communication Interfaces
  • Integrated Analog and Digital Peripherals
  • Built-in Safety and Security Features

Advantages and Disadvantages

Advantages

  • High Performance
  • Reliable Operation in Harsh Environments
  • Extensive Communication Interface Support
  • Comprehensive Development Tools and Support

Disadvantages

  • Higher Cost Compared to Entry-level Microcontrollers
  • Complex Programming and Configuration Requirements

Working Principles

The MB90F498GPMCR-G-TE2 operates on the principle of real-time data processing and control. It utilizes its advanced architecture and integrated peripherals to efficiently manage automotive systems' functions and respond to external stimuli in real time.

Detailed Application Field Plans

The MB90F498GPMCR-G-TE2 is extensively used in automotive applications such as engine control units, transmission control units, chassis control systems, and body control modules. Its robust performance and communication capabilities make it suitable for demanding automotive environments.

Detailed and Complete Alternative Models

  • MB91F467B: A lower-cost alternative with similar architecture and features
  • MB96F348RSB: A higher-performance alternative with additional integrated peripherals
  • RH850/U2A: A scalable alternative with enhanced safety and security features

In conclusion, the MB90F498GPMCR-G-TE2 is a high-performance microcontroller designed for automotive applications, offering advanced control and processing capabilities. Its reliability and extensive feature set make it a preferred choice for automotive system developers seeking robust and efficient solutions.

Word Count: 489

技術ソリューションにおける MB90F498GPMCR-G-TE2 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the MB90F498GPMCR-G-TE2 microcontroller used for?

    • The MB90F498GPMCR-G-TE2 microcontroller is commonly used in automotive applications, industrial control systems, and consumer electronics due to its high performance and reliability.

  2. What are the key features of the MB90F498GPMCR-G-TE2?

    • The MB90F498GPMCR-G-TE2 features a 32-bit RISC CPU core, on-chip flash memory, various communication interfaces, and analog peripherals, making it suitable for a wide range of technical solutions.

  3. How does the MB90F498GPMCR-G-TE2 handle real-time processing?

    • The MB90F498GPMCR-G-TE2 is equipped with a real-time clock and timer modules, enabling precise timing and control in real-time applications.

  4. Can the MB90F498GPMCR-G-TE2 be used for motor control applications?

    • Yes, the MB90F498GPMCR-G-TE2 includes pulse-width modulation (PWM) channels and other features that make it well-suited for motor control applications.

  5. What development tools are available for programming the MB90F498GPMCR-G-TE2?

    • Renesas provides a comprehensive set of development tools, including compilers, debuggers, and evaluation boards, to facilitate programming and testing of the MB90F498GPMCR-G-TE2.

  6. Is the MB90F498GPMCR-G-TE2 suitable for safety-critical applications?

    • Yes, the MB90F498GPMCR-G-TE2 complies with relevant safety standards and offers features such as built-in self-test (BIST) capabilities, making it suitable for safety-critical applications.

  7. What communication interfaces are supported by the MB90F498GPMCR-G-TE2?

    • The MB90F498GPMCR-G-TE2 supports various communication interfaces, including UART, SPI, I2C, and CAN, allowing seamless integration into diverse technical solutions.

  8. Can the MB90F498GPMCR-G-TE2 operate in harsh environmental conditions?

    • Yes, the MB90F498GPMCR-G-TE2 is designed to withstand harsh environmental conditions, with a wide operating temperature range and robust construction.

  9. Are there any specific power management features in the MB90F498GPMCR-G-TE2?

    • The MB90F498GPMCR-G-TE2 incorporates power-saving modes and low-power consumption design, making it suitable for battery-powered or energy-efficient applications.

  10. What support and documentation are available for the MB90F498GPMCR-G-TE2?

    • Renesas provides extensive technical documentation, application notes, and customer support to assist developers in effectively utilizing the MB90F498GPMCR-G-TE2 in their technical solutions.