MB90F883CSTPMC-G-N9E1

Product Overview

Category: Microcontroller
Use: Embedded systems, automotive applications
Characteristics: High-performance, low-power consumption, compact size
Package: CSTPMC-G-N9E1
Essence: Advanced microcontroller for automotive applications
Packaging/Quantity: Individual units

Specifications

• Operating Voltage: 2.7V to 5.5V
• CPU Core: 16-bit H8SX/1664R
• Clock Frequency: Up to 40 MHz
• Flash Memory: 512 KB
• RAM: 32 KB
• EEPROM: 4 KB
• I/O Ports: 80
• Timers/Counters: 16-bit x 10, 8-bit x 6
• Analog-to-Digital Converter (ADC): 10-bit x 8 channels
• Serial Communication Interfaces: UART, I2C, SPI, LIN
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MB90F883CSTPMC-G-N9E1 microcontroller has a total of 100 pins. The pin configuration is as follows:

• Pins 1-20: General-purpose I/O ports
• Pins 21-28: Analog input pins
• Pins 29-36: Serial communication interface pins
• Pins 37-44: Timer/counter pins
• Pins 45-52: Power supply and ground pins
• Pins 53-60: External interrupt pins
• Pins 61-68: Clock input/output pins
• Pins 69-76: Reset and test pins
• Pins 77-84: Flash memory control pins
• Pins 85-92: EEPROM control pins
• Pins 93-100: Reserved pins

Functional Features

• High-performance 16-bit CPU core for efficient processing
• Wide operating voltage range for flexibility in various applications
• Flash memory for program storage and EEPROM for data storage
• Multiple I/O ports and serial communication interfaces for connectivity
• Analog-to-digital converter for sensor interfacing
• Timer/counters for precise timing operations
• External interrupt pins for event-driven programming
• Clock input/output pins for synchronization with external devices
• Reset and test pins for system debugging and testing

Advantages and Disadvantages

Advantages: - High-performance microcontroller suitable for demanding automotive applications - Low-power consumption for energy-efficient operation - Compact size allows for space-saving designs - Wide operating temperature range for reliable performance in harsh environments

Disadvantages: - Limited flash memory and RAM capacity compared to some other microcontrollers - Higher cost compared to lower-end microcontrollers

Working Principles

The MB90F883CSTPMC-G-N9E1 microcontroller operates based on the H8SX/1664R CPU core. It executes instructions stored in its flash memory, processes data, and controls various peripherals and I/O devices. The microcontroller communicates with external devices through its serial communication interfaces, such as UART, I2C, SPI, and LIN. It can read analog signals from sensors using its built-in ADC and perform precise timing operations using its timer/counters. The microcontroller's working principles are based on a combination of hardware and software algorithms designed to meet the requirements of automotive applications.

Detailed Application Field Plans

The MB90F883CSTPMC-G-N9E1 microcontroller is specifically designed for automotive applications. It can be used in various systems within vehicles, including:

1. Engine control units (ECUs)
2. Transmission control units (TCUs)
3. Body control modules (BCMs)
4. Anti-lock braking systems (ABS)
5. Airbag control units (ACUs)
6. Infotainment systems
7. Climate control systems

The microcontroller's high-performance, low-power consumption, and compact size make it suitable for these applications, where reliability, efficiency, and space constraints are crucial.

Detailed and Complete Alternative Models

1. MB90F883CSTPMC-G-N9E2: Similar to MB90F883CSTPMC-G-N9E1 with increased flash memory capacity (1 MB).
2. MB90F883CSTPMC-G-N9E3: Similar to MB90F883CSTPMC-G-N9E1 with increased RAM capacity (64 KB).
3. MB90F883CSTPMC-G-N9E4: Similar to MB90F883CSTPMC-G-N9E1 with additional CAN bus interface.
4. MB90F883CSTPMC-G-N9E5: Similar to MB90F883CSTPMC-G-N9E1 with extended operating temperature range (-40°C to +105°C).