MB91F365GBPMT-G-N2E1

Product Overview

• Category: Microcontroller
• Use: Embedded systems, automotive applications
• Characteristics:
  • High-performance 32-bit microcontroller
  • Low power consumption
  • Wide operating temperature range
  • Automotive-grade quality
• Package: LQFP-100
• Essence: Advanced microcontroller for automotive embedded systems
• Packaging/Quantity: Tray packaging, quantity per tray: 250 units

Specifications

• Architecture: ARM Cortex-M3
• Clock Speed: Up to 80 MHz
• Flash Memory: 256 KB
• RAM: 32 KB
• Operating Voltage: 2.7V to 5.5V
• Operating Temperature Range: -40°C to +105°C
• I/O Pins: 74
• Communication Interfaces: UART, SPI, I2C, CAN
• Analog-to-Digital Converter (ADC): 12-bit, 8 channels
• Timers/Counters: 16-bit, 4 channels
• PWM Channels: 6
• Operating Current: 10 mA (typical)

Detailed Pin Configuration

The MB91F365GBPMT-G-N2E1 microcontroller has a total of 100 pins arranged in a LQFP package. The pin configuration is as follows:

• Pin 1: VDD
• Pin 2: GND
• Pin 3: XTAL1
• Pin 4: XTAL2
• Pin 5: RESET
• Pin 6: P0_0
• Pin 7: P0_1
• Pin 8: P0_2
• ...
• Pin 99: P7_5
• Pin 100: P7_6

Functional Features

• High-performance ARM Cortex-M3 core for efficient processing
• Low power consumption for extended battery life
• Wide operating temperature range for automotive applications
• Comprehensive set of communication interfaces for seamless integration
• Built-in analog-to-digital converter for precise sensor measurements
• Timers/counters and PWM channels for accurate timing control

Advantages and Disadvantages

Advantages: - High-performance microcontroller suitable for demanding applications - Automotive-grade quality ensures reliability in harsh environments - Low power consumption extends battery life - Wide operating temperature range allows usage in extreme conditions - Ample I/O pins and communication interfaces provide flexibility in system design

Disadvantages: - Limited flash memory and RAM capacity compared to some other microcontrollers - Higher cost compared to entry-level microcontrollers

Working Principles

The MB91F365GBPMT-G-N2E1 microcontroller operates based on the ARM Cortex-M3 architecture. It executes instructions stored in its flash memory, processes data, and controls various peripherals and interfaces. The microcontroller communicates with external devices through UART, SPI, I2C, and CAN interfaces. It also features an analog-to-digital converter for precise measurement of analog signals. The microcontroller's working principles are governed by its firmware, which is developed using appropriate programming languages and tools.

Detailed Application Field Plans

The MB91F365GBPMT-G-N2E1 microcontroller is specifically designed for automotive embedded systems. It finds applications in various areas, including:

1. Engine Control Units (ECUs)
2. Body Control Modules (BCMs)
3. Infotainment Systems
4. Advanced Driver Assistance Systems (ADAS)
5. Lighting Control Systems
6. Climate Control Systems
7. Powertrain Control Modules (PCMs)

Due to its high performance, low power consumption, and automotive-grade quality, the microcontroller is well-suited for these applications.

Detailed and Complete Alternative Models

1. MB91F365GBPMT-G-N2E2: Similar to MB91F365GBPMT-G-N2E1 with increased flash memory capacity (512 KB)
2. MB91F365GBPMT-G-N2E3: Similar to MB91F365GBPMT-G-N2E1 with increased RAM capacity (64 KB)
3. MB91F365GBPMT-G-N2E4: Similar to MB91F365GBPMT-G-N2E1 with additional communication interfaces (Ethernet, LIN)

These alternative models offer enhanced capabilities while maintaining compatibility with the MB91F365GBPMT-G-N2E1 microcontroller.

In conclusion, the MB91F365GBPMT-G-N2E1 microcontroller is a high-performance 32-bit microcontroller designed for automotive embedded systems. With its advanced features, it provides reliable and efficient control in various automotive applications.