商品詳細は仕様をご覧ください。
MB91F367GBPMT-G
Product Overview
- Category: Microcontroller
- Use: Embedded systems, automotive applications
- Characteristics: High-performance, low-power consumption
- Package: LQFP (Low-profile Quad Flat Package)
- Essence: Advanced microcontroller for automotive applications
- Packaging/Quantity: Tray packaging, quantity varies
Specifications
- Architecture: 16-bit RISC
- CPU Clock Speed: Up to 32 MHz
- Flash Memory: 256 KB
- RAM: 16 KB
- Operating Voltage: 2.7V - 5.5V
- I/O Pins: 48
- Communication Interfaces: UART, SPI, I2C, LIN
- Timers/Counters: 8-bit and 16-bit timers/counters
- Analog-to-Digital Converter (ADC): 10-bit resolution, up to 8 channels
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The MB91F367GBPMT-G microcontroller has a total of 48 pins. The pin configuration is as follows:
- VDDIO
- P0_0
- P0_1
- P0_2
- P0_3
- P0_4
- P0_5
- P0_6
- P0_7
- P1_0
- P1_1
- P1_2
- P1_3
- P1_4
- P1_5
- P1_6
- P1_7
- P2_0
- P2_1
- P2_2
- P2_3
- P2_4
- P2_5
- P2_6
- P2_7
- P3_0
- P3_1
- P3_2
- P3_3
- P3_4
- P3_5
- P3_6
- P3_7
- RESET
- XTAL1
- XTAL2
- VSSIO
- AVDD
- AVSS
- AN0
- AN1
- AN2
- AN3
- AN4
- AN5
- AN6
- AN7
- VDD
Functional Features
- High-performance 16-bit RISC architecture for efficient processing
- Low-power consumption for extended battery life in automotive applications
- Flash memory for program storage and flexibility
- Ample RAM for data storage and manipulation
- Multiple communication interfaces for seamless integration with other devices
- Timers/counters for precise timing and event handling
- Analog-to-digital converter for analog signal processing
- Wide operating temperature range for reliable operation in harsh environments
Advantages and Disadvantages
Advantages: - High-performance architecture enables fast and efficient processing - Low-power consumption extends battery life in automotive applications - Ample memory and I/O capabilities for versatile application development - Multiple communication interfaces facilitate connectivity with other devices - Wide operating temperature range ensures reliability in various conditions
Disadvantages: - Limited flash memory capacity compared to some other microcontrollers - Relatively higher cost compared to lower-end microcontrollers
Working Principles
The MB91F367GBPMT-G microcontroller operates based on a 16-bit RISC architecture. It executes instructions stored in its flash memory, utilizing the CPU clock speed of up to 32 MHz. The microcontroller interacts with external devices through its I/O pins and communication interfaces such as UART, SPI, I2C, and LIN. It can perform various tasks using timers/counters for precise timing and an analog-to-digital converter for processing analog signals. The microcontroller's low-power consumption ensures efficient operation in automotive applications.
Detailed Application Field Plans
The MB91F367GBPMT-G microcontroller is widely used in automotive applications, including but not limited to:
- Engine Control Units (ECUs)
- Body Control Modules (BCMs)
- Infotainment Systems
- Advanced Driver Assistance Systems (ADAS)
- Lighting Control Systems
- Climate Control Systems
- Powertrain Control Modules (PCMs)
Its high-performance capabilities, low-power consumption, and versatile communication interfaces make it suitable for various automotive subsystems.
Detailed and Complete Alternative Models
- MB91F366GBPMT-G: Similar to MB91F367GBPMT-G with slightly lower flash memory capacity (128 KB).
- MB91F368GBPMT-G: Similar to MB91F367GBPMT-G with
技術ソリューションにおける MB91F367GBPMT-G の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of MB91F367GBPMT-G in technical solutions:
Q: What is MB91F367GBPMT-G? A: MB91F367GBPMT-G is a microcontroller unit (MCU) manufactured by Fujitsu. It is commonly used in various technical solutions for embedded systems.
Q: What are the key features of MB91F367GBPMT-G? A: Some key features of MB91F367GBPMT-G include a 32-bit RISC CPU, on-chip flash memory, multiple communication interfaces, analog-to-digital converters, and various timers.
Q: What are the typical applications of MB91F367GBPMT-G? A: MB91F367GBPMT-G is often used in automotive electronics, industrial control systems, home appliances, and other embedded applications that require real-time processing and connectivity.
Q: How much flash memory does MB91F367GBPMT-G have? A: MB91F367GBPMT-G has 512 KB of on-chip flash memory, which can be used for storing program code and data.
Q: Can I expand the memory capacity of MB91F367GBPMT-G? A: Yes, MB91F367GBPMT-G supports external memory expansion through its memory bus interface, allowing you to connect additional memory devices if needed.
Q: What communication interfaces are available on MB91F367GBPMT-G? A: MB91F367GBPMT-G provides UART, SPI, I2C, CAN, and LIN interfaces, enabling communication with other devices or networks.
Q: Does MB91F367GBPMT-G support analog inputs? A: Yes, MB91F367GBPMT-G has built-in analog-to-digital converters (ADCs) that can be used to measure analog signals from sensors or other sources.
Q: Can I use MB91F367GBPMT-G for real-time applications? A: Yes, MB91F367GBPMT-G is designed for real-time processing and offers features like interrupt handling, timers, and event-driven programming to support real-time applications.
Q: What development tools are available for MB91F367GBPMT-G? A: Fujitsu provides a comprehensive set of development tools, including an integrated development environment (IDE), compilers, debuggers, and emulators specifically designed for programming and debugging MB91F367GBPMT-G.
Q: Where can I find more information about MB91F367GBPMT-G? A: You can refer to the official documentation provided by Fujitsu, including datasheets, application notes, and user manuals, which can be found on their website or obtained through their authorized distributors.