Cypress Semiconductor Corp
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MB91F465BBPMC-GS-N2K5E2

MB91F465BBPMC-GS-N2K5E2

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, automotive applications
  • Characteristics: High-performance, low-power consumption, integrated peripherals
  • Package: BGA (Ball Grid Array)
  • Essence: Advanced microcontroller for automotive control systems
  • Packaging/Quantity: Tray packaging, quantity per tray: 250 units

Specifications

  • Microcontroller Family: MB91F4xx
  • CPU Core: ARM Cortex-M3
  • Clock Frequency: Up to 80 MHz
  • Flash Memory: 512 KB
  • RAM: 64 KB
  • Operating Voltage: 2.7V - 5.5V
  • Operating Temperature Range: -40°C to +105°C
  • Communication Interfaces: CAN, LIN, UART, I2C, SPI
  • Analog-to-Digital Converter (ADC): 12-bit, 16 channels
  • Timers: 16-bit and 32-bit timers
  • PWM Channels: 8 channels
  • Operating Current: 10 mA (typical)

Detailed Pin Configuration

The MB91F465BBPMC-GS-N2K5E2 microcontroller has a total of 100 pins. The pin configuration is as follows:

  • Pin 1: VDD
  • Pin 2: VSS
  • Pin 3: XTAL1
  • Pin 4: XTAL2
  • Pin 5: RESET
  • Pin 6: P0_0
  • Pin 7: P0_1
  • Pin 8: P0_2
  • ...
  • Pin 99: P9_6
  • Pin 100: P9_7

Please refer to the datasheet for a complete pin configuration diagram.

Functional Features

  • High-performance ARM Cortex-M3 core for efficient processing
  • Integrated peripherals such as CAN, LIN, UART, I2C, and SPI for communication
  • 12-bit ADC for accurate analog signal conversion
  • Timers and PWM channels for precise timing control
  • Low-power consumption for energy-efficient applications
  • Wide operating voltage range and temperature range for automotive environments

Advantages and Disadvantages

Advantages

  • Powerful microcontroller with high-performance ARM Cortex-M3 core
  • Integrated peripherals simplify system design and reduce external component count
  • Wide operating voltage and temperature range suitable for automotive applications
  • Low-power consumption extends battery life in portable devices

Disadvantages

  • Limited flash memory and RAM compared to some other microcontrollers in the same category
  • BGA package may require specialized equipment for soldering and rework

Working Principles

The MB91F465BBPMC-GS-N2K5E2 microcontroller operates based on the ARM Cortex-M3 architecture. It executes instructions stored in its flash memory and interacts with various peripherals to perform specific tasks. The microcontroller can communicate with external devices through its communication interfaces such as CAN, LIN, UART, I2C, and SPI. It also has built-in analog-to-digital converters for precise measurement of analog signals. The timers and PWM channels enable accurate timing control for different applications.

Detailed Application Field Plans

The MB91F465BBPMC-GS-N2K5E2 microcontroller is specifically designed for automotive control systems. It can be used in various applications within the automotive industry, including:

  1. Engine control units (ECUs)
  2. Transmission control units (TCUs)
  3. Body control modules (BCMs)
  4. Anti-lock braking systems (ABS)
  5. Airbag control units (ACUs)
  6. Instrument clusters
  7. Infotainment systems

The microcontroller's high-performance capabilities, integrated peripherals, and automotive-grade specifications make it suitable for these demanding applications.

Detailed and Complete Alternative Models

  1. MB91F467BBPMC-GS-N2K5E2: Similar microcontroller with extended flash memory and RAM capacity.
  2. MB91F461CBPMC-GS-N2K5E2: Lower-cost variant with reduced features and peripheral options.
  3. MB91F469BBPMC-GS-N2K5E2: Higher-end model with additional communication interfaces and expanded I/O capabilities.

These alternative models provide flexibility in choosing the right microcontroller based on specific project requirements.

Word count: 550 words

技術ソリューションにおける MB91F465BBPMC-GS-N2K5E2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MB91F465BBPMC-GS-N2K5E2 in technical solutions:

  1. Q: What is MB91F465BBPMC-GS-N2K5E2? A: MB91F465BBPMC-GS-N2K5E2 is a microcontroller unit (MCU) manufactured by Fujitsu. It is designed for automotive applications and features an ARM Cortex-M3 core.

  2. Q: What are the key features of MB91F465BBPMC-GS-N2K5E2? A: Some key features include CAN (Controller Area Network) interface, LIN (Local Interconnect Network) interface, multiple timers, ADC (Analog-to-Digital Converter), UART (Universal Asynchronous Receiver-Transmitter), and various communication protocols.

  3. Q: What are the typical applications of MB91F465BBPMC-GS-N2K5E2? A: This MCU is commonly used in automotive systems such as body control modules, powertrain control modules, instrument clusters, and other electronic control units (ECUs).

  4. Q: Can MB91F465BBPMC-GS-N2K5E2 handle real-time tasks? A: Yes, it has a powerful ARM Cortex-M3 core that can handle real-time tasks efficiently.

  5. Q: Does MB91F465BBPMC-GS-N2K5E2 support CAN and LIN interfaces? A: Yes, it supports both CAN and LIN interfaces, making it suitable for automotive networking applications.

  6. Q: How many ADC channels does MB91F465BBPMC-GS-N2K5E2 have? A: It has up to 16 analog input channels, allowing for precise measurement of various sensors.

  7. Q: Can MB91F465BBPMC-GS-N2K5E2 communicate with external devices? A: Yes, it has multiple communication interfaces such as UART, SPI (Serial Peripheral Interface), and I2C (Inter-Integrated Circuit) for seamless communication with external devices.

  8. Q: Is MB91F465BBPMC-GS-N2K5E2 suitable for low-power applications? A: Yes, it features various power-saving modes and optimized power management, making it suitable for low-power applications.

  9. Q: Does MB91F465BBPMC-GS-N2K5E2 have built-in security features? A: Yes, it includes hardware security modules (HSMs) that provide encryption and authentication capabilities to enhance system security.

  10. Q: What development tools are available for MB91F465BBPMC-GS-N2K5E2? A: Fujitsu provides a comprehensive set of development tools, including an integrated development environment (IDE), compilers, debuggers, and software libraries, to facilitate the development process.

Please note that these questions and answers are general in nature and may vary depending on specific requirements and applications.