MB96F346RSBPMC-GS-N2E2

Product Overview

• Category: Microcontroller
• Use: Embedded systems, industrial automation, consumer electronics
• Characteristics: High-performance, low-power consumption, compact size
• Package: Surface Mount Technology (SMT)
• Essence: Advanced microcontroller with integrated peripherals
• Packaging/Quantity: Tape and reel packaging, 1000 units per reel

Specifications

• Microcontroller Family: MB96F3x Series
• CPU Core: ARM Cortex-M0+
• Operating Frequency: Up to 48 MHz
• Flash Memory: 256 KB
• RAM: 16 KB
• Digital I/O Pins: 32
• Analog Input Channels: 12
• Communication Interfaces: UART, SPI, I2C, USB
• Operating Voltage: 2.7V - 5.5V
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MB96F346RSBPMC-GS-N2E2 microcontroller has a total of 64 pins. The pin configuration is as follows:

• Pin 1: VDD (Power Supply)
• Pin 2: GND (Ground)
• Pin 3: RESET (Reset Signal)
• Pin 4-19: Digital I/O Pins (GPIO)
• Pin 20-31: Analog Input Pins (ADC)
• Pin 32-47: Communication Interface Pins (UART, SPI, I2C, USB)
• Pin 48-64: Reserved

Functional Features

• High-performance ARM Cortex-M0+ core for efficient processing
• Integrated flash memory for program storage
• Rich set of peripherals for versatile applications
• Low-power consumption for extended battery life
• Robust communication interfaces for seamless connectivity
• Flexible analog input channels for sensor integration
• Enhanced security features for data protection

Advantages and Disadvantages

Advantages: - High-performance processing capabilities - Compact size for space-constrained applications - Low-power consumption for energy-efficient designs - Versatile communication interfaces for easy integration - Rich set of peripherals for diverse functionality

Disadvantages: - Limited RAM capacity compared to higher-end microcontrollers - Relatively higher cost compared to entry-level microcontrollers

Working Principles

The MB96F346RSBPMC-GS-N2E2 microcontroller operates based on the ARM Cortex-M0+ core architecture. It executes instructions stored in its flash memory, interacts with peripherals through various communication interfaces, and processes data from sensors or external devices. The microcontroller's working principle revolves around executing user-defined programs to control and monitor connected systems.

Detailed Application Field Plans

The MB96F346RSBPMC-GS-N2E2 microcontroller finds application in various fields, including:

1. Industrial Automation:

   • Control systems for manufacturing equipment
   • Motor control applications
   • PLC (Programmable Logic Controller) systems

2. Consumer Electronics:

   • Smart home automation
   • Wearable devices
   • Home appliances

3. Automotive:

   • Engine management systems
   • Infotainment systems
   • Advanced driver-assistance systems (ADAS)

4. Internet of Things (IoT):

   • Sensor nodes for environmental monitoring
   • Edge computing devices
   • IoT gateways

Detailed and Complete Alternative Models

1. MB96F346RSBPMC-GS-N2E1: Similar to MB96F346RSBPMC-GS-N2E2 but with different pin configuration.
2. MB96F346RSBPMC-GS-N2E3: Higher-end version with increased flash memory and RAM capacity.
3. MB96F346RSBPMC-GS-N2E4: Lower-cost variant with reduced peripheral set.

(Note: The above alternative models are for illustrative purposes only and may not reflect actual product availability.)

This encyclopedia entry provides an overview of the MB96F346RSBPMC-GS-N2E2 microcontroller, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.