MB9AF116NAPMC-G-YE1

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Microcontroller
• Characteristics:
  • High-performance
  • Low-power consumption
  • Advanced peripheral functions
• Package: LQFP (Low-profile Quad Flat Package)
• Essence: A microcontroller designed for various applications requiring high performance and low power consumption.
• Packaging/Quantity: Available in tape and reel packaging, with a quantity of 250 units per reel.

Specifications

• Architecture: ARM Cortex-M3
• CPU Clock Speed: Up to 72 MHz
• Flash Memory: 128 KB
• RAM: 20 KB
• Operating Voltage: 2.7V to 5.5V
• I/O Ports: 48
• Timers: 4
• Communication Interfaces: UART, SPI, I2C
• Analog-to-Digital Converter (ADC): 12-bit, 8 channels
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MB9AF116NAPMC-G-YE1 microcontroller has a total of 100 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VDD | Power Supply (Positive) | | 2 | GND | Ground | | 3 | RESET | Reset Input | | 4 | XTAL1 | Crystal Oscillator Input | | 5 | XTAL2 | Crystal Oscillator Output | | ... | ... | ... | | 100 | VSS | Ground |

Functional Features

• High-performance ARM Cortex-M3 core for efficient processing.
• Advanced peripheral functions such as UART, SPI, and I2C for communication.
• 12-bit ADC for accurate analog-to-digital conversion.
• Multiple timers for precise timing control.
• Low-power consumption for energy-efficient applications.

Advantages and Disadvantages

Advantages: - High-performance processing capabilities. - Advanced peripheral functions for versatile applications. - Low-power consumption for energy efficiency. - Adequate memory capacity for most applications.

Disadvantages: - Limited I/O ports compared to some other microcontrollers. - Relatively higher cost compared to entry-level microcontrollers.

Working Principles

The MB9AF116NAPMC-G-YE1 microcontroller operates based on the ARM Cortex-M3 architecture. It executes instructions stored in its flash memory, processes data, and controls various peripherals to perform desired tasks. The microcontroller communicates with external devices through its communication interfaces and interacts with the environment using its I/O ports. It operates within the specified voltage range and provides reliable performance even in harsh operating conditions.

Detailed Application Field Plans

The MB9AF116NAPMC-G-YE1 microcontroller is suitable for a wide range of applications, including but not limited to: - Industrial automation systems - Consumer electronics - Automotive electronics - Home appliances - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

• MB9AF112NAPMC-G-YE1: Similar specifications but with 64 KB flash memory instead of 128 KB.
• MB9AF118NAPMC-G-YE1: Similar specifications but with 256 KB flash memory instead of 128 KB.
• MB9AF120NAPMC-G-YE1: Similar specifications but with 512 KB flash memory instead of 128 KB.

(Note: These alternative models are provided as examples and may not represent an exhaustive list of alternatives.)

This concludes the encyclopedia entry for the MB9AF116NAPMC-G-YE1 microcontroller.