Cypress Semiconductor Corp
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S25FL256SDSMFV013
詳細を表示 DataSheets

S25FL256SDSMFV013

Product Overview

  • Category: Flash Memory
  • Use: Data storage and retrieval in electronic devices
  • Characteristics: High capacity, fast read/write speeds, non-volatile memory
  • Package: Surface Mount Device (SMD)
  • Essence: Non-volatile memory chip for storing and retrieving data in electronic devices
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Memory Capacity: 256 Megabits (32 Megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature: -40°C to +85°C
  • Data Retention: Up to 20 years
  • Erase/Program Cycles: 100,000 cycles

Pin Configuration

The S25FL256SDSMFV013 has a total of 16 pins arranged as follows:

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Hold (/HOLD)
  6. Write Protect (/WP)
  7. Ground (GND)
  8. VCC Power Supply (VCC)
  9. Address Inputs (A0-A22)
  10. Reset (/RESET)
  11. No Connect (NC)
  12. No Connect (NC)
  13. No Connect (NC)
  14. No Connect (NC)
  15. No Connect (NC)
  16. No Connect (NC)

Functional Features

  • High-speed data transfer using SPI interface
  • Sector erase and byte/page program operations
  • Software and hardware write protection options
  • Low power consumption in standby mode
  • Efficient block management algorithms for enhanced performance

Advantages

  • Large storage capacity for data-intensive applications
  • Fast read/write speeds for quick data access
  • Non-volatile memory retains data even when power is disconnected
  • Flexible write protection options for data security
  • Low power consumption extends battery life in portable devices

Disadvantages

  • Limited erase/program cycles may affect long-term durability
  • Higher cost compared to traditional storage solutions like hard drives
  • Relatively small storage capacity compared to other flash memory options

Working Principles

The S25FL256SDSMFV013 utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is disconnected. The chip supports sector erase and byte/page program operations, allowing efficient management of data storage. It also offers software and hardware write protection options to prevent unauthorized modifications.

Application Field Plans

The S25FL256SDSMFV013 is widely used in various electronic devices that require reliable and high-capacity data storage. Some common application fields include:

  1. Consumer Electronics: Smartphones, tablets, digital cameras
  2. Automotive: Infotainment systems, navigation systems
  3. Industrial: Embedded systems, control units, data loggers
  4. Networking: Routers, switches, network storage devices

Alternative Models

  1. S25FL128SAGMFI001
  2. S25FL512SAGMFIR01
  3. S25FL064LAGMFI010
  4. S25FL256SAGMFIR01
  5. S25FL032PAGMFI000

These alternative models offer similar functionality and capacity but may have slight differences in specifications and pin configuration.

Note: This entry contains 437 words. Additional content is required to reach the desired word count of 1100.

技術ソリューションにおける S25FL256SDSMFV013 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S25FL256SDSMFV013 in technical solutions:

1. What is the S25FL256SDSMFV013? The S25FL256SDSMFV013 is a flash memory device manufactured by Cypress Semiconductor. It has a capacity of 256 megabits (32 megabytes) and is commonly used for storing data in various electronic devices.

2. What is the interface of the S25FL256SDSMFV013? The S25FL256SDSMFV013 uses a Serial Peripheral Interface (SPI) for communication with the host microcontroller or system.

3. What voltage levels does the S25FL256SDSMFV013 support? The S25FL256SDSMFV013 supports a wide range of voltage levels, typically from 2.7V to 3.6V.

4. What is the maximum data transfer rate of the S25FL256SDSMFV013? The S25FL256SDSMFV013 has a maximum data transfer rate of up to 104 MHz when using the SPI interface.

5. Can the S25FL256SDSMFV013 be used for code execution? Yes, the S25FL256SDSMFV013 can be used for code execution in certain applications. It supports execute-in-place (XIP) functionality, allowing the microcontroller to directly execute code stored in the flash memory.

6. Is the S25FL256SDSMFV013 suitable for high-reliability applications? Yes, the S25FL256SDSMFV013 is designed for high-reliability applications. It offers features like advanced wear-leveling algorithms, error correction codes (ECC), and robust data retention capabilities.

7. Can the S25FL256SDSMFV013 be used in automotive applications? Yes, the S25FL256SDSMFV013 is qualified for automotive-grade applications. It meets the AEC-Q100 Grade 2 specifications, making it suitable for use in automotive systems.

8. Does the S25FL256SDSMFV013 support security features? Yes, the S25FL256SDSMFV013 provides hardware-based security features like sector protection, password protection, and a unique device ID. These features help protect sensitive data stored in the flash memory.

9. What is the typical lifespan of the S25FL256SDSMFV013? The S25FL256SDSMFV013 has a typical endurance of 100,000 program/erase cycles per sector. This means that each sector can be programmed and erased up to 100,000 times before it may start to degrade.

10. Can the S25FL256SDSMFV013 operate in extreme temperature conditions? Yes, the S25FL256SDSMFV013 is designed to operate in a wide temperature range, typically from -40°C to +85°C. This makes it suitable for use in applications that require operation in harsh environments.

Please note that the answers provided here are general and may vary depending on specific product variants or application requirements.