V29GL128P90TAIR10

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Memory device
• Characteristics:
  • Non-volatile
  • Flash memory
  • High capacity
  • Fast access time
• Package: TFBGA (Thin Fine-Pitch Ball Grid Array)
• Essence: Data storage and retrieval
• Packaging/Quantity: Individually packaged, quantity varies based on supplier

Specifications

• Manufacturer: Vitesse Semiconductor Corporation
• Model: V29GL128P90TAIR10
• Memory Type: NOR Flash
• Capacity: 128 Megabits (16 Megabytes)
• Access Time: 90 nanoseconds
• Interface: Parallel
• Supply Voltage: 2.7V to 3.6V
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The V29GL128P90TAIR10 has a total of 56 pins. The pin configuration is as follows:

1. A0 - Address Input
2. A1 - Address Input
3. A2 - Address Input
4. A3 - Address Input
5. A4 - Address Input
6. A5 - Address Input
7. A6 - Address Input
8. A7 - Address Input
9. A8 - Address Input
10. A9 - Address Input
11. A10 - Address Input
12. A11 - Address Input
13. A12 - Address Input
14. A13 - Address Input
15. A14 - Address Input
16. A15 - Address Input
17. A16 - Address Input
18. A17 - Address Input
19. A18 - Address Input
20. A19 - Address Input
21. A20 - Address Input
22. A21 - Address Input
23. A22 - Address Input
24. A23 - Address Input
25. A24 - Address Input
26. A25 - Address Input
27. ALE - Address Latch Enable
28. CE# - Chip Enable
29. CLE - Command Latch Enable
30. WE# - Write Enable
31. RE# - Read Enable
32. WP# - Write Protect
33. BYTE# - Byte Enable
34. DQ0 - Data Input/Output
35. DQ1 - Data Input/Output
36. DQ2 - Data Input/Output
37. DQ3 - Data Input/Output
38. DQ4 - Data Input/Output
39. DQ5 - Data Input/Output
40. DQ6 - Data Input/Output
41. DQ7 - Data Input/Output
42. VCC - Power Supply
43. VSS - Ground
44. RB# - Ready/Busy
45. RESET# - Reset
46. RY/BY# - Ready/Busy Output
47. VPP - Programming Voltage
48. NC - No Connection
49. NC - No Connection
50. NC - No Connection
51. NC - No Connection
52. NC - No Connection
53. NC - No Connection
54. NC - No Connection
55. NC - No Connection
56. NC - No Connection

Functional Features

• Non-volatile memory: The V29GL128P90TAIR10 retains data even when power is removed.
• Flash memory: Allows for fast read and write operations.
• High capacity: With a capacity of 128 Megabits, it can store large amounts of data.
• Fast access time: The access time of 90 nanoseconds ensures quick data retrieval.

Advantages and Disadvantages

Advantages: - Non-volatile nature ensures data persistence. - Flash memory technology enables fast read and write operations. - High storage capacity allows for extensive data storage.

Disadvantages: - Limited endurance: Flash memory has a limited number of erase/write cycles. - Relatively higher cost compared to other memory technologies.

Working Principles

The V29GL128P90TAIR10 is based on NOR flash memory technology. It utilizes a grid of memory cells, where each cell can store one or more bits of information. The memory cells are organized into an array, with each cell being individually addressable. Data can be written to and read from these cells using specific electrical signals applied to the pins of the IC.

Detailed Application Field Plans

The V29GL128P90TAIR10 finds applications in various fields, including: 1. Embedded systems: Used for storing firmware, boot code, and configuration data in devices like microcontrollers and industrial control systems. 2. Consumer electronics: Employed in devices such as digital cameras, set-top boxes, and gaming consoles for data storage purposes. 3. Automotive industry: Utilized in automotive electronics