Diodes Incorporated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AP1084D50L-U
詳細を表示 DataSheets

AP1084D50L-U

Product Overview

Category

AP1084D50L-U belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Adjustable output voltage
  • Overcurrent and thermal protection
  • Wide input voltage range

Package

AP1084D50L-U is available in a TO-252 package.

Essence

The essence of AP1084D50L-U lies in its ability to provide stable and regulated voltage for various electronic applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 2.5V - 7V
  • Output Voltage Range: 1.25V - 5.5V
  • Maximum Output Current: 5A
  • Dropout Voltage: 1.3V @ 5A
  • Line Regulation: ±0.2%
  • Load Regulation: ±0.4%
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

AP1084D50L-U has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • High Precision: AP1084D50L-U provides accurate and stable output voltage regulation.
  • Low Dropout Voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Adjustable Output Voltage: The output voltage can be adjusted within a specified range.
  • Overcurrent and Thermal Protection: It incorporates protection mechanisms to prevent damage due to excessive current or temperature.
  • Wide Input Voltage Range: It can accept a wide range of input voltages, making it suitable for various applications.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance.
  • Low dropout voltage allows efficient operation in low input voltage scenarios.
  • Adjustable output voltage provides flexibility for different application requirements.
  • Overcurrent and thermal protection safeguards the device from damage.
  • Wide input voltage range makes it versatile for diverse electronic circuits.

Disadvantages

  • May require additional external components for certain applications.
  • Higher cost compared to basic linear regulators.
  • Limited maximum output current compared to some other voltage regulators.

Working Principles

AP1084D50L-U is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the output voltage with a reference voltage and adjusting the pass transistor accordingly to maintain a stable output voltage. The internal circuitry ensures precise regulation, while the overcurrent and thermal protection mechanisms protect the device from potential damage.

Detailed Application Field Plans

AP1084D50L-U finds applications in various fields, including but not limited to: - Power supplies for consumer electronics - Automotive electronics - Industrial control systems - Telecommunications equipment - Medical devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to AP1084D50L-U are: - LM317 - LT1084 - LM7805 - LM1117

These models offer similar functionality and can be used as substitutes based on specific requirements.

Word count: 413 words

技術ソリューションにおける AP1084D50L-U の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AP1084D50L-U in technical solutions:

  1. Q: What is AP1084D50L-U? A: AP1084D50L-U is a voltage regulator IC that provides a fixed output voltage of 5V.

  2. Q: What is the input voltage range for AP1084D50L-U? A: The input voltage range for AP1084D50L-U is typically between 7V and 20V.

  3. Q: What is the maximum output current of AP1084D50L-U? A: AP1084D50L-U can provide a maximum output current of 5A.

  4. Q: How does AP1084D50L-U regulate the output voltage? A: AP1084D50L-U uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable 5V output.

  5. Q: Can AP1084D50L-U be used in automotive applications? A: Yes, AP1084D50L-U is suitable for automotive applications as it can handle wide temperature ranges and has built-in protection features.

  6. Q: Does AP1084D50L-U require any external components for operation? A: Yes, AP1084D50L-U requires input and output capacitors for stability and proper operation.

  7. Q: What is the dropout voltage of AP1084D50L-U? A: The dropout voltage of AP1084D50L-U is typically around 1.2V at full load.

  8. Q: Can AP1084D50L-U be used in battery-powered applications? A: Yes, AP1084D50L-U can be used in battery-powered applications as it has low quiescent current and low dropout voltage.

  9. Q: What are the protection features of AP1084D50L-U? A: AP1084D50L-U has built-in protection against overcurrent, thermal shutdown, and reverse polarity.

  10. Q: Can AP1084D50L-U be used in high-frequency switching applications? A: No, AP1084D50L-U is not suitable for high-frequency switching applications as it is a linear regulator and operates at a fixed frequency.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.