Diodes Incorporated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AP1084K15L-U
詳細を表示 DataSheets

AP1084K15L-U

Product Overview

Category

AP1084K15L-U belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Current limiting and thermal shutdown protection
  • Adjustable output voltage
  • Wide input voltage range

Package

AP1084K15L-U is available in a TO-263 package.

Essence

The essence of AP1084K15L-U is to provide a stable and regulated output voltage for various electronic devices.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 20V
  • Output Voltage Range: 1.25V to 18V
  • Output Current: Up to 5A
  • Dropout Voltage: 1.3V (typical)
  • Line Regulation: ±0.2% (typical)
  • Load Regulation: ±0.4% (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

AP1084K15L-U has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. ADJ: Adjust pin for setting the output voltage
  4. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: AP1084K15L-U ensures a stable output voltage regardless of input voltage fluctuations.
  • Current limiting: It protects the circuit by limiting the output current to a safe level.
  • Thermal shutdown protection: In case of excessive heat, the regulator shuts down to prevent damage.
  • Adjustable output voltage: The output voltage can be adjusted using an external resistor.
  • Wide input voltage range: AP1084K15L-U can handle a wide range of input voltages, making it versatile for various applications.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance.
  • Low dropout voltage minimizes power dissipation.
  • Current limiting and thermal shutdown protection enhance circuit safety.
  • Adjustable output voltage allows flexibility in design.
  • Wide input voltage range makes it suitable for different applications.

Disadvantages

  • May require additional external components for certain applications.
  • Higher cost compared to basic linear regulators.
  • Limited output current compared to some other voltage regulators.

Working Principles

AP1084K15L-U is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

AP1084K15L-U finds applications in various electronic devices and systems, including: - Power supplies - Battery chargers - Audio amplifiers - Industrial control systems - Automotive electronics - Telecommunications equipment

Detailed and Complete Alternative Models

Some alternative models to AP1084K15L-U include: - LM317 - LT1084 - LM7805 - LM1117 - LM2940

These models offer similar functionality and can be used as alternatives depending on specific requirements.

Word count: 416 words

技術ソリューションにおける AP1084K15L-U の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AP1084K15L-U in technical solutions:

  1. Q: What is AP1084K15L-U? A: AP1084K15L-U is a voltage regulator IC that provides a fixed output voltage of 1.5V.

  2. Q: What is the input voltage range for AP1084K15L-U? A: The input voltage range for AP1084K15L-U is typically between 2.7V and 30V.

  3. Q: What is the maximum output current of AP1084K15L-U? A: AP1084K15L-U can provide a maximum output current of 5A.

  4. Q: How does AP1084K15L-U regulate the output voltage? A: AP1084K15L-U uses a feedback mechanism to maintain a constant output voltage despite changes in input voltage or load conditions.

  5. Q: Can AP1084K15L-U be used in battery-powered applications? A: Yes, AP1084K15L-U can be used in battery-powered applications as long as the input voltage is within the specified range.

  6. Q: Does AP1084K15L-U require any external components for operation? A: Yes, AP1084K15L-U requires input and output capacitors for stability and proper operation.

  7. Q: Is AP1084K15L-U suitable for high-temperature environments? A: Yes, AP1084K15L-U is designed to operate at high temperatures and has built-in thermal protection features.

  8. Q: Can AP1084K15L-U be used in both step-up and step-down voltage conversion applications? A: No, AP1084K15L-U is a linear voltage regulator and can only be used for step-down voltage conversion.

  9. Q: What are the typical applications of AP1084K15L-U? A: AP1084K15L-U is commonly used in various electronic devices, such as power supplies, battery chargers, and automotive applications.

  10. Q: Is there any special consideration when using AP1084K15L-U in high-current applications? A: Yes, in high-current applications, proper heat sinking should be provided to ensure that the IC operates within its specified temperature limits.

Please note that these answers are general and may vary depending on the specific requirements and conditions of your technical solution.