Diodes Incorporated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AP1084K50L-U
詳細を表示 DataSheets

AP1084K50L-U

Product Overview

Category

AP1084K50L-U belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Current limiting protection
  • Thermal shutdown protection

Package

AP1084K50L-U is available in a TO-263 package.

Essence

The essence of AP1084K50L-U is to provide a stable and regulated output voltage for various electronic devices.

Packaging/Quantity

AP1084K50L-U is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6V
  • Output Voltage: 5V
  • Output Current: Up to 5A
  • Dropout Voltage: 1.3V (typical)
  • Line Regulation: ±0.2% (typical)
  • Load Regulation: ±0.4% (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

AP1084K50L-U has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • High accuracy voltage regulation ensures stable output voltage.
  • Low dropout voltage allows efficient operation even with low input voltages.
  • Current limiting protection prevents damage due to excessive current.
  • Thermal shutdown protection safeguards against overheating.

Advantages

  • High precision voltage regulation ensures reliable performance.
  • Low dropout voltage enables efficient power conversion.
  • Current limiting protection enhances circuit safety.
  • Thermal shutdown protection prevents device failure due to overheating.

Disadvantages

  • Limited input voltage range may restrict certain applications.
  • Higher dropout voltage compared to some alternative models.
  • May require additional external components for specific circuit configurations.

Working Principles

AP1084K50L-U operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to maintain a stable output voltage. It utilizes a feedback mechanism to continuously monitor and regulate the output voltage.

Detailed Application Field Plans

AP1084K50L-U finds applications in various electronic devices, including but not limited to: - Power supplies - Battery-powered systems - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to AP1084K50L-U are: - LM317 - LT1084 - LM1117 - LM7805 - LM2940

These models offer similar functionality and can be used as substitutes depending on specific requirements and constraints.

Word count: 346 words

技術ソリューションにおける AP1084K50L-U の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AP1084K50L-U in technical solutions:

  1. Q: What is AP1084K50L-U? A: AP1084K50L-U is a voltage regulator IC that provides a fixed output voltage of 5V.

  2. Q: What is the input voltage range for AP1084K50L-U? A: The input voltage range for AP1084K50L-U is typically between 7V and 20V.

  3. Q: Can AP1084K50L-U handle high current loads? A: Yes, AP1084K50L-U has a maximum output current rating of 5A, making it suitable for high current applications.

  4. Q: Is AP1084K50L-U suitable for both linear and switching power supply designs? A: No, AP1084K50L-U is specifically designed for linear power supply designs.

  5. Q: Does AP1084K50L-U require any external components for operation? A: Yes, AP1084K50L-U requires input and output capacitors for stability and filtering purposes.

  6. Q: Can AP1084K50L-U operate in a wide temperature range? A: Yes, AP1084K50L-U can operate within a temperature range of -40°C to +125°C.

  7. Q: What is the dropout voltage of AP1084K50L-U? A: The typical dropout voltage of AP1084K50L-U is around 1.3V at full load.

  8. Q: Is AP1084K50L-U protected against overcurrent and thermal overload? A: Yes, AP1084K50L-U has built-in protection features such as current limiting and thermal shutdown.

  9. Q: Can AP1084K50L-U be used in battery-powered applications? A: Yes, AP1084K50L-U can be used in battery-powered applications as long as the input voltage is within its specified range.

  10. Q: What are some typical applications of AP1084K50L-U? A: AP1084K50L-U is commonly used in various electronic devices, including industrial equipment, consumer electronics, and automotive systems, where a stable 5V power supply is required.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.