Diodes Incorporated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AP130-18YRG-13
詳細を表示 DataSheets

AP130-18YRG-13

Product Overview

Category

AP130-18YRG-13 belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for various applications.

Characteristics

  • Compact size
  • High performance
  • Reliable operation
  • Wide operating temperature range

Package

AP130-18YRG-13 is available in a small surface mount package.

Essence

The essence of this product lies in its ability to regulate voltage and provide stable power supply to electronic devices.

Packaging/Quantity

AP130-18YRG-13 is typically packaged in reels or trays, with a quantity of 1000 units per package.

Specifications

  • Input Voltage Range: 2.5V - 5.5V
  • Output Voltage: 1.8V
  • Output Current: Up to 1.3A
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

AP130-18YRG-13 has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Fast transient response

Advantages

  • High efficiency
  • Small form factor
  • Wide input voltage range
  • Excellent load and line regulation
  • Robust protection features

Disadvantages

  • Limited output current capacity
  • Higher cost compared to some alternatives

Working Principles

AP130-18YRG-13 operates as a linear voltage regulator. It takes an input voltage within the specified range and provides a regulated output voltage of 1.8V. The feedback pin (FB) is used to control the output voltage by adjusting the internal reference voltage.

Detailed Application Field Plans

AP130-18YRG-13 finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication modules

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to AP130-18YRG-13 are: - AP1117-3.3 - LM317 - LT1763 - TPS7A4700

These models offer similar functionality and can be used depending on specific requirements and design considerations.

In conclusion, AP130-18YRG-13 is a compact and high-performance voltage regulator used in various electronic circuits. Its wide input voltage range, excellent regulation, and protection features make it suitable for a range of applications. However, its limited output current capacity and higher cost compared to some alternatives should be taken into consideration during the selection process.

技術ソリューションにおける AP130-18YRG-13 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is AP130-18YRG-13?
    - AP130-18YRG-13 is a high-performance, multi-purpose adhesive designed for technical solutions.

  2. What materials can AP130-18YRG-13 be used on?
    - AP130-18YRG-13 can be used on various materials including metal, plastic, rubber, and composites.

  3. What is the recommended application temperature for AP130-18YRG-13?
    - The recommended application temperature for AP130-18YRG-13 is between 65°F and 100°F (18°C and 38°C).

  4. How long does it take for AP130-18YRG-13 to cure?
    - AP130-18YRG-13 typically cures within 24 hours, depending on environmental conditions.

  5. Can AP130-18YRG-13 be used for outdoor applications?
    - Yes, AP130-18YRG-13 is suitable for outdoor applications as it provides excellent weather resistance.

  6. Is AP130-18YRG-13 resistant to chemicals and solvents?
    - Yes, AP130-18YRG-13 exhibits good resistance to chemicals and solvents once fully cured.

  7. What is the shelf life of AP130-18YRG-13?
    - The shelf life of AP130-18YRG-13 is approximately 12 months when stored in its original unopened container at room temperature.

  8. Can AP130-18YRG-13 be painted over after application?
    - Yes, AP130-18YRG-13 can be painted over once it has fully cured.

  9. Does AP130-18YRG-13 require any special surface preparation before application?
    - It is recommended to clean and dry the surfaces before applying AP130-18YRG-13 for optimal adhesion.

  10. What are some typical applications for AP130-18YRG-13 in technical solutions?
    - Typical applications for AP130-18YRG-13 include bonding components in automotive, aerospace, marine, and industrial equipment, as well as in structural bonding and assembly processes.