Diodes Incorporated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AP2125K-3.0TRE1
詳細を表示 DataSheets

AP2125K-3.0TRE1

Product Overview

Category

AP2125K-3.0TRE1 belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The AP2125K-3.0TRE1 comes in a compact SOT-23 package.
  • Essence: This voltage regulator provides stable and reliable voltage output.
  • Packaging/Quantity: It is typically sold in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of AP2125K-3.0TRE1 are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 3.0V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50μA (typical)
  • Line Regulation: ±0.2% (typical)
  • Load Regulation: ±0.4% (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of AP2125K-3.0TRE1 is as follows:

  • Pin 1: VIN (Input Voltage)
  • Pin 2: GND (Ground)
  • Pin 3: VOUT (Output Voltage)

Functional Features

The functional features of AP2125K-3.0TRE1 include:

  • Low dropout voltage: The voltage regulator can operate efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: It consumes minimal current when in standby mode, conserving power.
  • Overcurrent protection: The device includes built-in protection against excessive current, safeguarding the circuitry.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact package size allows for easy integration into space-constrained designs.
  • Wide input voltage range enables compatibility with various power sources.
  • Low dropout voltage ensures efficient operation even with low input voltages.
  • Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • The fixed output voltage may not be adjustable for specific requirements.

Working Principles

AP2125K-3.0TRE1 operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This results in a stable output voltage regardless of variations in the input voltage or load conditions.

Detailed Application Field Plans

AP2125K-3.0TRE1 finds applications in various electronic devices and systems, including but not limited to:

  1. Battery-powered devices: It can regulate the voltage for portable electronics such as smartphones, tablets, and wearable devices.
  2. IoT devices: The voltage regulator is suitable for powering sensors, microcontrollers, and communication modules in IoT applications.
  3. Automotive electronics: It can be used in automotive systems like infotainment systems, lighting controls, and engine management units.
  4. Industrial control systems: The regulator can provide stable voltage for PLCs (Programmable Logic Controllers), motor drives, and other industrial automation equipment.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to AP2125K-3.0TRE1 include:

  1. LM1117-3.3: A popular voltage regulator with an output voltage of 3.3V and similar specifications.
  2. MCP1700-3002E: Another voltage regulator with a fixed 3.0V output and low dropout voltage.
  3. TS2940CX33: A compact SOT-23 packaged regulator with a fixed 3.3V output and low quiescent current.

These alternative models can be considered based on specific requirements and availability.

Word count: 515 words

技術ソリューションにおける AP2125K-3.0TRE1 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AP2125K-3.0TRE1 in technical solutions:

Q1: What is the AP2125K-3.0TRE1? A1: The AP2125K-3.0TRE1 is a specific model of voltage regulator IC (integrated circuit) manufactured by a particular company.

Q2: What is the purpose of the AP2125K-3.0TRE1? A2: The AP2125K-3.0TRE1 is designed to regulate and stabilize voltage levels in electronic circuits, ensuring a consistent power supply.

Q3: What is the input voltage range for the AP2125K-3.0TRE1? A3: The AP2125K-3.0TRE1 has an input voltage range of X volts to Y volts (specific values can be found in the datasheet).

Q4: What is the output voltage of the AP2125K-3.0TRE1? A4: The AP2125K-3.0TRE1 provides a fixed output voltage of 3.0 volts.

Q5: What is the maximum current rating of the AP2125K-3.0TRE1? A5: The AP2125K-3.0TRE1 has a maximum current rating of Z amps (specific value can be found in the datasheet).

Q6: Can the AP2125K-3.0TRE1 handle both AC and DC input voltages? A6: No, the AP2125K-3.0TRE1 is designed to work with DC input voltages only.

Q7: Is the AP2125K-3.0TRE1 suitable for battery-powered applications? A7: Yes, the AP2125K-3.0TRE1 is commonly used in battery-powered devices due to its low power consumption and efficiency.

Q8: Does the AP2125K-3.0TRE1 have built-in protection features? A8: Yes, the AP2125K-3.0TRE1 typically includes overcurrent protection, thermal shutdown, and short-circuit protection.

Q9: Can multiple AP2125K-3.0TRE1 ICs be connected in parallel for higher current output? A9: Yes, it is possible to connect multiple AP2125K-3.0TRE1 ICs in parallel to increase the overall current output capacity.

Q10: Are there any specific application notes or reference designs available for the AP2125K-3.0TRE1? A10: Yes, the manufacturer usually provides application notes and reference designs that can help with the implementation of the AP2125K-3.0TRE1 in various technical solutions. These resources can be found on their website or in the datasheet.