AP2132UMP-1.8TRG1

Product Overview

Category

AP2132UMP-1.8TRG1 belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

• Package: The AP2132UMP-1.8TRG1 comes in a compact surface-mount package.
• Essence: It is a low-dropout linear regulator designed for efficient voltage regulation.
• Packaging/Quantity: This product is typically packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

The following are the specifications of AP2132UMP-1.8TRG1:

• Input Voltage Range: 2.5V to 6.0V
• Output Voltage: 1.8V
• Dropout Voltage: 200mV (typical)
• Maximum Output Current: 300mA
• Line Regulation: ±0.2% (typical)
• Load Regulation: ±0.4% (typical)
• Quiescent Current: 50µA (typical)

Detailed Pin Configuration

The AP2132UMP-1.8TRG1 has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. EN: Enable pin (active high)

Functional Features

The functional features of AP2132UMP-1.8TRG1 include:

• Low dropout voltage: The regulator maintains a stable output voltage even when the input voltage is close to the desired output voltage.
• Low quiescent current: The device consumes minimal current when in standby mode, conserving power.
• Thermal shutdown protection: The regulator automatically shuts down if the temperature exceeds a safe operating limit, preventing damage to the device.
• Short-circuit protection: The regulator is designed to withstand short-circuit conditions without causing damage.

Advantages and Disadvantages

Advantages

• Efficient voltage regulation
• Compact package size
• Low dropout voltage
• Thermal and short-circuit protection

Disadvantages

• Limited maximum output current (300mA)
• Input voltage range limited to 2.5V to 6.0V

Working Principles

The AP2132UMP-1.8TRG1 operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This ensures that the output voltage remains stable even when there are fluctuations in the input voltage or load conditions.

Detailed Application Field Plans

AP2132UMP-1.8TRG1 finds applications in various electronic devices and systems, including:

1. Battery-powered devices: It can be used to regulate voltage in portable electronics such as smartphones, tablets, and wearable devices.
2. IoT devices: The regulator is suitable for low-power IoT applications where efficient voltage regulation is crucial.
3. Industrial control systems: It can be employed in industrial automation systems to ensure stable voltage supply to sensitive components.
4. Automotive electronics: The regulator can be utilized in automotive applications to regulate voltage for various subsystems.

Detailed and Complete Alternative Models

Some alternative models to AP2132UMP-1.8TRG1 include:

1. AP2112K-1.8TRG1
2. AP2204K-1.8TRG1
3. AP1117E18G-13

These models offer similar voltage regulation capabilities and may vary in terms of package size, input/output voltage ranges, and other specifications.

In conclusion, AP2132UMP-1.8TRG1 is a voltage regulator with efficient voltage regulation, compact packaging, and various protective features. It finds applications in battery-powered devices, IoT systems, industrial control, and automotive electronics. Alternative models such as AP2112K-1.8TRG1 and AP2204K-1.8TRG1 can be considered based on specific requirements.