AZ1084CS-3.3TRE1 belongs to the category of voltage regulators.
This product is commonly used to regulate voltage in electronic circuits.
AZ1084CS-3.3TRE1 is available in a TO-263 package.
The essence of this product lies in its ability to provide stable and regulated voltage output.
AZ1084CS-3.3TRE1 is typically packaged in reels or tubes, with quantities varying based on customer requirements.
AZ1084CS-3.3TRE1 has the following pin configuration:
AZ1084CS-3.3TRE1 utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.
AZ1084CS-3.3TRE1 finds applications in various electronic devices, including but not limited to: - Power supplies - Battery-powered systems - Industrial control systems - Automotive electronics - Telecommunications equipment
Some alternative models that can be considered as alternatives to AZ1084CS-3.3TRE1 are: - LM317 - LT1084 - LM1117 - TPS7A3301
These models offer similar voltage regulation capabilities and can be used based on specific requirements and availability.
Word count: 346 words
Sure! Here are 10 common questions and answers related to the application of AZ1084CS-3.3TRE1 in technical solutions:
Q1: What is the AZ1084CS-3.3TRE1? A1: The AZ1084CS-3.3TRE1 is a voltage regulator IC that provides a fixed output voltage of 3.3V.
Q2: What is the input voltage range for the AZ1084CS-3.3TRE1? A2: The input voltage range for the AZ1084CS-3.3TRE1 is typically between 4.5V and 20V.
Q3: What is the maximum output current of the AZ1084CS-3.3TRE1? A3: The maximum output current of the AZ1084CS-3.3TRE1 is 5A.
Q4: How does the AZ1084CS-3.3TRE1 handle thermal protection? A4: The AZ1084CS-3.3TRE1 has built-in thermal shutdown protection to prevent overheating.
Q5: Can the AZ1084CS-3.3TRE1 be used in both step-up and step-down applications? A5: No, the AZ1084CS-3.3TRE1 is a linear voltage regulator and can only be used for step-down applications.
Q6: What is the dropout voltage of the AZ1084CS-3.3TRE1? A6: The dropout voltage of the AZ1084CS-3.3TRE1 is typically around 1.5V.
Q7: Is an external capacitor required for stability with the AZ1084CS-3.3TRE1? A7: Yes, an output capacitor is required for stability. The recommended value is 10μF.
Q8: Can the AZ1084CS-3.3TRE1 be used in automotive applications? A8: Yes, the AZ1084CS-3.3TRE1 is suitable for automotive applications as it meets the AEC-Q100 standard.
Q9: What is the operating temperature range of the AZ1084CS-3.3TRE1? A9: The operating temperature range of the AZ1084CS-3.3TRE1 is typically between -40°C and +125°C.
Q10: Can the AZ1084CS-3.3TRE1 be used in battery-powered applications? A10: Yes, the AZ1084CS-3.3TRE1 can be used in battery-powered applications as it has low quiescent current and low dropout voltage.
Please note that these answers are general and may vary depending on the specific application and requirements.