画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AZ1084D-ADJTRG1

AZ1084D-ADJTRG1

Product Overview

Category: Voltage Regulator
Use: This product is used to regulate voltage in electronic circuits.
Characteristics: The AZ1084D-ADJTRG1 is a high-performance adjustable linear voltage regulator. It offers low dropout voltage, high output current capability, and excellent line and load regulation.
Package: The AZ1084D-ADJTRG1 comes in a TO-263 package.
Essence: The essence of this product is to provide a stable and regulated voltage output for various electronic devices.
Packaging/Quantity: The AZ1084D-ADJTRG1 is typically packaged in reels or tubes, with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 7V
  • Output Voltage Range: 1.25V to 5.5V
  • Dropout Voltage: 1.3V (typical)
  • Output Current: Up to 5A
  • Line Regulation: 0.015% (typical)
  • Load Regulation: 0.1% (typical)
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The AZ1084D-ADJTRG1 has the following pin configuration:

```


| | --| VIN | --| GND | --| ADJ | --| VOUT | |___________| ```

Functional Features

  • Adjustable output voltage.
  • Low dropout voltage.
  • High output current capability.
  • Excellent line and load regulation.
  • Thermal shutdown protection.
  • Short circuit current limit.

Advantages

  • Wide input voltage range.
  • High output current capability.
  • Low dropout voltage.
  • Excellent line and load regulation.
  • Thermal shutdown protection ensures safe operation.

Disadvantages

  • The TO-263 package may require additional space on the PCB compared to smaller packages.
  • Higher cost compared to some other voltage regulators with similar specifications.

Working Principles

The AZ1084D-ADJTRG1 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with a fraction of the output voltage, and adjusts the pass transistor accordingly to maintain a stable output voltage.

Application Field Plans

The AZ1084D-ADJTRG1 can be used in various applications where a regulated voltage supply is required. Some common application fields include:

  1. Power supplies for microcontrollers and digital circuits.
  2. Battery charging circuits.
  3. Audio amplifiers.
  4. Industrial control systems.
  5. Automotive electronics.

Alternative Models

  • LM317: A popular adjustable linear voltage regulator with similar specifications.
  • LT1084: Another high-performance adjustable linear voltage regulator.
  • LM1117: Low dropout voltage regulator with fixed output voltage options.

These alternative models can be considered based on specific requirements and design constraints.

Word count: 314 words

技術ソリューションにおける AZ1084D-ADJTRG1 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AZ1084D-ADJTRG1 in technical solutions:

Q1: What is AZ1084D-ADJTRG1? A1: AZ1084D-ADJTRG1 is a voltage regulator IC that provides a fixed or adjustable output voltage for various electronic applications.

Q2: What is the input voltage range of AZ1084D-ADJTRG1? A2: The input voltage range of AZ1084D-ADJTRG1 is typically between 3.5V and 30V.

Q3: What is the output voltage range of AZ1084D-ADJTRG1? A3: The output voltage range of AZ1084D-ADJTRG1 can be adjusted from 1.25V to 29V.

Q4: How much current can AZ1084D-ADJTRG1 handle? A4: AZ1084D-ADJTRG1 can handle a maximum output current of 5A.

Q5: Is AZ1084D-ADJTRG1 suitable for both fixed and adjustable voltage applications? A5: Yes, AZ1084D-ADJTRG1 can be used for both fixed and adjustable voltage applications.

Q6: Does AZ1084D-ADJTRG1 require any external components for operation? A6: Yes, AZ1084D-ADJTRG1 requires a few external components such as capacitors and resistors for proper operation.

Q7: Can AZ1084D-ADJTRG1 handle thermal overload protection? A7: Yes, AZ1084D-ADJTRG1 has built-in thermal overload protection to prevent overheating.

Q8: What is the typical dropout voltage of AZ1084D-ADJTRG1? A8: The typical dropout voltage of AZ1084D-ADJTRG1 is around 1.5V.

Q9: Can AZ1084D-ADJTRG1 be used in automotive applications? A9: Yes, AZ1084D-ADJTRG1 is suitable for automotive applications as it meets the necessary requirements and standards.

Q10: Are there any recommended application circuits available for AZ1084D-ADJTRG1? A10: Yes, the datasheet of AZ1084D-ADJTRG1 provides several recommended application circuits that can be used as a reference for different scenarios.

Please note that these answers are general and may vary depending on specific design considerations and requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.