Diodes Incorporated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BZT52C16TQ-7-F
詳細を表示 DataSheets

BZT52C16TQ-7-F: Product Overview and Analysis

Introduction

The BZT52C16TQ-7-F is a crucial component in the field of electronics, belonging to the category of Zener diodes. This entry provides an in-depth analysis of the product, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics: Precise voltage regulation, low leakage current, and high reliability
  • Package: SOD-123 package
  • Essence: Semiconductor device for maintaining a stable voltage across a load
  • Packaging/Quantity: Available in reels with varying quantities

Specifications

  • Voltage: 16V
  • Power Dissipation: 350mW
  • Zener Voltage Tolerance: ±5%
  • Operating Temperature Range: -65°C to +150°C
  • Storage Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The BZT52C16TQ-7-F Zener diode has a standard SOD-123 package with two pins. The cathode is connected to the marked side of the diode, while the anode is connected to the unmarked side.

Functional Features

  • Voltage Regulation: Maintains a constant voltage across the load
  • Overvoltage Protection: Safeguards sensitive components from voltage spikes
  • Low Leakage Current: Minimizes power loss in standby mode
  • High Reliability: Ensures consistent performance over time

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Compact SOD-123 package
  • Low leakage current
  • High reliability

Disadvantages

  • Limited power dissipation capability
  • Narrow operating temperature range

Working Principles

The BZT52C16TQ-7-F operates based on the Zener effect, where it maintains a constant voltage drop across its terminals by allowing current to flow in reverse bias when the applied voltage reaches the Zener voltage.

Detailed Application Field Plans

The BZT52C16TQ-7-F finds extensive use in various electronic applications, including: - Voltage regulation in power supplies - Overvoltage protection in communication systems - Signal clamping in audio circuits - Voltage reference in instrumentation

Detailed and Complete Alternative Models

Several alternative models to the BZT52C16TQ-7-F include: - BZX84C16LT1G: Similar SOT-23 package with 16V Zener voltage - MM3Z16VT1G: 16V Zener voltage in SOD-323 package - 1N4744A: Axial lead Zener diode with 16V voltage rating

In conclusion, the BZT52C16TQ-7-F Zener diode serves as a critical component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its compact size and high reliability make it suitable for a wide range of applications, despite its limitations in power dissipation and operating temperature range.

[Word Count: 472]

技術ソリューションにおける BZT52C16TQ-7-F の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of BZT52C16TQ-7-F:

  1. What is the maximum power dissipation of BZT52C16TQ-7-F?

    • The maximum power dissipation is 300mW.

  2. What is the forward voltage of BZT52C16TQ-7-F?

    • The forward voltage is typically 0.9V at 10mA.

  3. What is the reverse standoff voltage of BZT52C16TQ-7-F?

    • The reverse standoff voltage is 16V.

  4. What is the operating temperature range of BZT52C16TQ-7-F?

    • The operating temperature range is -65°C to +150°C.

  5. What is the package type of BZT52C16TQ-7-F?

    • The package type is SOD-123.

  6. What is the breakdown voltage of BZT52C16TQ-7-F?

    • The breakdown voltage is 17.8V minimum at 5mA.

  7. What are the typical applications for BZT52C16TQ-7-F?

    • Typical applications include voltage regulation, overvoltage protection, and transient suppression.

  8. What is the reverse leakage current of BZT52C16TQ-7-F?

    • The reverse leakage current is typically 1µA at 12V.

  9. What is the capacitance of BZT52C16TQ-7-F?

    • The capacitance is typically 40pF at 1MHz and 1V.

  10. What are the key features of BZT52C16TQ-7-F?

    • The key features include low profile package, low leakage current, and high reliability.

I hope these questions and answers help provide a better understanding of the application of BZT52C16TQ-7-F in technical solutions. Let me know if you need further assistance!