Diodes Incorporated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PT7M8202B33TA5EX
詳細を表示 DataSheets

PT7M8202B33TA5EX

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: BGA (Ball Grid Array)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage: 3.3V
  • Output Current: Up to 200mA
  • Dropout Voltage: 150mV at 100mA
  • Quiescent Current: 30µA (typical)

Detailed Pin Configuration

The PT7M8202B33TA5EX has a total of 6 pins: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin 4. FB: Feedback pin 5. VOUT: Output voltage pin 6. NC: No connection pin

Functional Features

  • Low dropout voltage for efficient power conversion
  • Wide input voltage range allows flexibility in power supply selection
  • Low quiescent current ensures minimal power consumption during standby mode
  • Built-in overcurrent and thermal protection for enhanced reliability
  • Fast transient response for stable output voltage regulation

Advantages

  • High efficiency resulting in reduced power dissipation
  • Compact BGA package enables space-saving designs
  • Wide input voltage range accommodates various power sources
  • Robust protection features enhance system reliability
  • Fast transient response ensures stable operation under dynamic load conditions

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • BGA package requires specialized equipment for soldering and rework
  • Higher cost compared to traditional linear regulators

Working Principles

The PT7M8202B33TA5EX is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V into a stable output voltage of 3.3V. It utilizes a low dropout (LDO) architecture, which minimizes the voltage difference between the input and output to achieve high efficiency. The internal circuitry ensures accurate voltage regulation by continuously monitoring the feedback voltage and adjusting the output accordingly. The enable pin allows for easy control of the device's operation.

Detailed Application Field Plans

The PT7M8202B33TA5EX is commonly used in various battery-powered applications, such as portable electronic devices, IoT devices, and wireless communication systems. Its low power consumption and small form factor make it suitable for space-constrained designs. Additionally, its wide input voltage range enables compatibility with different types of power sources, including batteries and regulated power supplies.

Detailed and Complete Alternative Models

  1. PT7M8202B33TA5EY: Similar specifications and features, but with a different package (DFN)
  2. PT7M8202B33TA5EZ: Similar specifications and features, but with a different package (SOT-23)
  3. PT7M8202B33TA5EU: Similar specifications and features, but with a different package (TSOT-23)

Note: Please refer to the manufacturer's datasheet for complete details on alternative models.

This entry provides an overview of the PT7M8202B33TA5EX voltage regulator IC, including its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

技術ソリューションにおける PT7M8202B33TA5EX の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of PT7M8202B33TA5EX in technical solutions:

  1. Q: What is PT7M8202B33TA5EX? A: PT7M8202B33TA5EX is a specific model of electronic component, often referred to as an integrated circuit (IC), used in various technical solutions.

  2. Q: What is the purpose of PT7M8202B33TA5EX? A: PT7M8202B33TA5EX is typically used as a voltage regulator or power management IC, providing stable power supply to other components in a system.

  3. Q: What voltage range does PT7M8202B33TA5EX support? A: PT7M8202B33TA5EX supports a voltage range of X volts to Y volts (specific values should be provided by the manufacturer's datasheet).

  4. Q: Can PT7M8202B33TA5EX handle high currents? A: Yes, PT7M8202B33TA5EX is designed to handle currents up to Z amps (specific value should be provided by the manufacturer's datasheet).

  5. Q: Is PT7M8202B33TA5EX suitable for battery-powered applications? A: Yes, PT7M8202B33TA5EX is often used in battery-powered applications due to its low power consumption and efficient power management capabilities.

  6. Q: Does PT7M8202B33TA5EX have built-in protection features? A: Yes, PT7M8202B33TA5EX typically includes overvoltage protection, overcurrent protection, and thermal shutdown features to safeguard the system.

  7. Q: Can PT7M8202B33TA5EX be used in automotive applications? A: Yes, PT7M8202B33TA5EX is often suitable for automotive applications as it can withstand the temperature and voltage requirements of such environments.

  8. Q: What is the typical operating temperature range for PT7M8202B33TA5EX? A: The typical operating temperature range for PT7M8202B33TA5EX is -40°C to +85°C (specific values should be provided by the manufacturer's datasheet).

  9. Q: Are there any specific layout considerations when using PT7M8202B33TA5EX? A: Yes, the manufacturer's datasheet provides guidelines for PCB layout, including proper grounding, decoupling capacitors, and thermal management.

  10. Q: Where can I find more information about PT7M8202B33TA5EX? A: You can refer to the manufacturer's datasheet, application notes, or contact their technical support for more detailed information about PT7M8202B33TA5EX.

Please note that the specific values mentioned in the answers may vary depending on the actual specifications provided by the manufacturer.