ZXCL400E5TA belongs to the category of voltage regulators.
It is primarily used for regulating voltage in electronic circuits.
ZXCL400E5TA comes in a small surface-mount package.
The essence of ZXCL400E5TA lies in its ability to provide stable and regulated voltage to electronic devices.
It is typically packaged in reels and available in quantities of 3000 units per reel.
ZXCL400E5TA has the following pin configuration:
ZXCL400E5TA operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry accordingly. It uses a feedback mechanism to maintain a stable output voltage despite changes in input voltage or load conditions.
ZXCL400E5TA finds applications in various fields, including but not limited to:
Some alternative models that can be considered as alternatives to ZXCL400E5TA are:
These models offer similar functionality and can be used as substitutes based on specific requirements.
Word count: 345 words
Sure! Here are 10 common questions and answers related to the application of ZXCL400E5TA in technical solutions:
Q: What is ZXCL400E5TA? A: ZXCL400E5TA is a voltage reference and shunt regulator IC manufactured by Diodes Incorporated.
Q: What is the typical input voltage range for ZXCL400E5TA? A: The typical input voltage range for ZXCL400E5TA is from 2.5V to 36V.
Q: What is the output voltage accuracy of ZXCL400E5TA? A: The output voltage accuracy of ZXCL400E5TA is typically ±1%.
Q: Can ZXCL400E5TA be used as a voltage reference? A: Yes, ZXCL400E5TA can be used as a voltage reference due to its high accuracy and stability.
Q: What is the maximum output current of ZXCL400E5TA? A: The maximum output current of ZXCL400E5TA is 50mA.
Q: Is ZXCL400E5TA suitable for battery-powered applications? A: Yes, ZXCL400E5TA is suitable for battery-powered applications as it has low quiescent current and operates over a wide input voltage range.
Q: Can ZXCL400E5TA be used in automotive applications? A: Yes, ZXCL400E5TA is automotive qualified and can be used in automotive applications.
Q: Does ZXCL400E5TA have built-in thermal shutdown protection? A: Yes, ZXCL400E5TA has built-in thermal shutdown protection to prevent overheating.
Q: Can ZXCL400E5TA be used in precision measurement circuits? A: Yes, ZXCL400E5TA can be used in precision measurement circuits due to its high accuracy and low temperature coefficient.
Q: What is the package type of ZXCL400E5TA? A: ZXCL400E5TA is available in a SOT23-3 package, which is small and suitable for space-constrained applications.
Please note that these answers are general and may vary depending on the specific application and requirements.