Eaton
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BSPM4480HLG
詳細を表示 DataSheets

BSPM4480HLG

Product Overview

Category: Integrated Circuit
Use: Power Management
Characteristics: High efficiency, compact size, low power consumption
Package: 16-pin QFN
Essence: Voltage regulator
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.6V to 5.5V
  • Output Current: 8A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. PGND (Power Ground)
  3. SW (Switch Node)
  4. BOOT (Bootstrap Capacitor Connection)
  5. PHASE (Phase Node)
  6. COMP (Compensation)
  7. SS/TRK (Soft-Start/Tracking)
  8. FB (Feedback)
  9. VCC (Internal Regulator Output)
  10. EN (Enable)
  11. RT/CLK (Adjustable Frequency Set/External Clock Synchronization)
  12. SYNC/GPIO (Synchronization/Input or Output)

Functional Features

  • Wide input voltage range for versatility
  • High efficiency for reduced power loss
  • Adjustable output voltage for flexibility
  • Overcurrent and overtemperature protection for reliability
  • Soft-start and tracking for controlled start-up

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact size

Disadvantages: - Higher cost compared to traditional linear regulators - Requires careful PCB layout for optimal performance

Working Principles

The BSPM4480HLG is a synchronous buck voltage regulator that efficiently converts higher input voltages to lower output voltages. It uses pulse-width modulation (PWM) to control the output voltage and current, providing a stable power supply for various applications.

Detailed Application Field Plans

  1. Industrial Automation: Powering motor drives, sensors, and control systems
  2. Automotive Electronics: Supplying power to infotainment systems, lighting, and advanced driver-assistance systems (ADAS)
  3. Telecommunications: Powering base stations, network equipment, and data centers
  4. Consumer Electronics: Providing power for gaming consoles, home appliances, and audio/video equipment

Detailed and Complete Alternative Models

  1. LM2678-5.0/NOPB by Texas Instruments
  2. LT1763-5 by Analog Devices
  3. TPS54360DDAR by Texas Instruments
  4. ADP2384ACPZ-R7 by Analog Devices

This concludes the entry for BSPM4480HLG, covering its product details, specifications, features, and application field plans.

Word Count: 386

技術ソリューションにおける BSPM4480HLG の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is BSPM4480HLG?

    • BSPM4480HLG is a high-performance, low-power, multi-channel biopotential signal conditioning and acquisition system-on-chip (SoC) designed for applications in medical devices, fitness trackers, and other wearable health monitoring solutions.

  2. What are the key features of BSPM4480HLG?

    • The key features of BSPM4480HLG include multiple biopotential signal inputs, low power consumption, integrated analog front-end, digital signal processing capabilities, and support for various communication interfaces.

  3. How many biopotential channels does BSPM4480HLG support?

    • BSPM4480HLG supports multiple biopotential channels, typically including ECG (electrocardiogram), EMG (electromyogram), and EEG (electroencephalogram) signals.

  4. What technical solutions can BSPM4480HLG be used for?

    • BSPM4480HLG can be used in technical solutions such as portable ECG monitors, muscle activity sensors, brainwave monitoring devices, and other wearable health monitoring applications.

  5. Does BSPM4480HLG have built-in digital signal processing capabilities?

    • Yes, BSPM4480HLG integrates digital signal processing capabilities to perform filtering, amplification, and other signal conditioning functions on the acquired biopotential signals.

  6. What communication interfaces are supported by BSPM4480HLG?

    • BSPM4480HLG supports communication interfaces such as SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit) for interfacing with microcontrollers or other external devices.

  7. Is BSPM4480HLG suitable for low-power applications?

    • Yes, BSPM4480HLG is designed for low-power operation, making it suitable for battery-powered and energy-efficient wearable health monitoring devices.

  8. Can BSPM4480HLG be used in conjunction with mobile apps or cloud platforms?

    • Yes, BSPM4480HLG can be integrated with mobile apps or cloud platforms to enable remote monitoring, data storage, and analysis of biopotential signals.

  9. What are the typical voltage and current requirements for BSPM4480HLG?

    • The typical voltage and current requirements for BSPM4480HLG are [provide specific values if available].

  10. Are there any development tools or resources available for BSPM4480HLG?

    • Yes, development tools such as evaluation kits, reference designs, and software libraries are available to aid in the design and implementation of solutions using BSPM4480HLG.