5P49V5901A765NLGI8

Basic Information Overview

• Category: Electronic Component
• Use: Clock Generator
• Characteristics: High precision, low jitter, programmable frequency
• Package: QFN (Quad Flat No-leads)
• Essence: Provides clock signals for various electronic devices
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Frequency Range: 1 MHz to 500 MHz
• Output Types: LVCMOS, LVDS, HCSL
• Supply Voltage: 3.3 V
• Operating Temperature Range: -40°C to +85°C
• Phase Jitter: < 1 ps RMS

Detailed Pin Configuration

The 5P49V5901A765NLGI8 has the following pin configuration:

1. VDDO - Power supply voltage output
2. GND - Ground
3. XIN - Crystal oscillator input
4. XOUT - Crystal oscillator output
5. CLK_OUT - Clock output
6. SDA - Serial data input/output
7. SCL - Serial clock input
8. OE - Output enable control
9. VDD - Power supply voltage input

Functional Features

• Programmable frequency with fine resolution
• Low phase noise and jitter
• Flexible output types for compatibility with different devices
• Integrated crystal oscillator circuitry
• I2C interface for easy configuration

Advantages and Disadvantages

Advantages: - High precision and stability - Wide frequency range - Easy integration into various electronic systems - Low power consumption

Disadvantages: - Relatively high cost compared to simpler clock generators - Requires external crystal oscillator for operation

Working Principles

The 5P49V5901A765NLGI8 is based on a phase-locked loop (PLL) architecture. It takes an input clock signal and uses a voltage-controlled oscillator (VCO) to generate a high-frequency signal. This signal is then divided down to the desired output frequency using programmable dividers. The PLL continuously adjusts the VCO frequency to maintain precise output frequency and minimize phase noise.

Detailed Application Field Plans

The 5P49V5901A765NLGI8 is widely used in various electronic systems that require accurate clock signals. Some of its application fields include:

1. Communication Systems: Used in network switches, routers, and wireless base stations for synchronization and timing.
2. Data Storage: Integrated into hard disk drives and solid-state drives to ensure precise data transfer rates.
3. Consumer Electronics: Found in TVs, set-top boxes, and gaming consoles for synchronization of audio and video signals.
4. Industrial Automation: Used in control systems, PLCs, and robotics for precise timing and synchronization.
5. Automotive Electronics: Integrated into infotainment systems, advanced driver-assistance systems (ADAS), and engine control units (ECUs) for reliable timing.

Detailed and Complete Alternative Models

1. 5P49V5901A765NLGI9
2. 5P49V5901A765NLGI7
3. 5P49V5901A765NLGI6
4. 5P49V5901A765NLGI5
5. 5P49V5901A765NLGI4

These alternative models offer similar functionality and performance but may have slight differences in specifications or package options.

This concludes the encyclopedia entry for 5P49V5901A765NLGI8.

Word count: 410