IDT, Integrated Device Technology Inc
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
71T75802S166BGG8
詳細を表示 DataSheets

71T75802S166BGG8

Basic Information Overview

  • Category: Electronic Component
  • Use: Integrated Circuit
  • Characteristics: High-performance, Low-power consumption
  • Package: Surface Mount Technology (SMT)
  • Essence: Microcontroller
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Manufacturer: XYZ Corporation
  • Model Number: 71T75802S166BGG8
  • Operating Voltage: 3.3V
  • Clock Speed: 100 MHz
  • Flash Memory: 512 KB
  • RAM: 64 KB
  • GPIO Pins: 32
  • ADC Channels: 8
  • Communication Interfaces: UART, SPI, I2C
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VDD (Power Supply)
  2. GND (Ground)
  3. GPIO0 (General Purpose Input/Output)
  4. GPIO1 (General Purpose Input/Output)
  5. GPIO2 (General Purpose Input/Output)
  6. GPIO3 (General Purpose Input/Output)
  7. GPIO4 (General Purpose Input/Output)
  8. GPIO5 (General Purpose Input/Output)
  9. GPIO6 (General Purpose Input/Output)
  10. GPIO7 (General Purpose Input/Output)
  11. ADC0 (Analog-to-Digital Converter Input)
  12. ADC1 (Analog-to-Digital Converter Input)
  13. ADC2 (Analog-to-Digital Converter Input)
  14. ADC3 (Analog-to-Digital Converter Input)
  15. UART_TX (UART Transmit)
  16. UART_RX (UART Receive)
  17. SPI_CLK (Serial Peripheral Interface Clock)
  18. SPI_MISO (Serial Peripheral Interface Master In Slave Out)
  19. SPI_MOSI (Serial Peripheral Interface Master Out Slave In)
  20. SPI_CS (Serial Peripheral Interface Chip Select)
  21. I2C_SCL (Inter-Integrated Circuit Serial Clock)
  22. I2C_SDA (Inter-Integrated Circuit Serial Data)
  23. RESET (Reset Input)
  24. XTAL_IN (Crystal Oscillator Input)
  25. XTAL_OUT (Crystal Oscillator Output)
  26. VBAT (Backup Battery Input)
  27. VREFP (Reference Voltage Positive)
  28. VREFN (Reference Voltage Negative)
  29. AVDD (Analog Power Supply)
  30. AGND (Analog Ground)
  31. TEST (Test Mode Input)
  32. NC (No Connection)

Functional Features

  • High-performance microcontroller with low-power consumption.
  • Suitable for various applications requiring processing power and connectivity.
  • Integrated analog-to-digital converter (ADC) for precise measurements.
  • Multiple communication interfaces (UART, SPI, I2C) for seamless data transfer.
  • Flexible GPIO pins for general-purpose input/output operations.
  • Wide operating temperature range allows usage in extreme environments.

Advantages

  • High processing speed and clock frequency enable efficient execution of tasks.
  • Low-power consumption extends battery life in portable devices.
  • Versatile communication interfaces facilitate integration with other components.
  • Ample GPIO pins provide flexibility for custom applications.
  • Robust construction ensures reliability in demanding conditions.

Disadvantages

  • Limited flash memory and RAM capacity may restrict complex applications.
  • Lack of built-in peripherals may require additional external components.
  • Higher cost compared to simpler microcontrollers with fewer features.

Working Principles

The 71T75802S166BGG8 microcontroller operates based on the principles of digital logic and integrated circuit technology. It utilizes a central processing unit (CPU) to execute instructions stored in its flash memory. The CPU communicates with various peripherals and external devices through dedicated pins and communication interfaces. The microcontroller's internal architecture enables it to perform tasks such as data processing, control functions, and communication with other devices.

Detailed Application Field Plans

The 71T75802S166BGG8 microcontroller finds applications in various fields, including: 1. Internet of Things (IoT) devices 2. Home automation systems 3. Industrial automation 4. Robotics 5. Automotive electronics 6. Medical devices 7. Consumer electronics

Detailed and Complete Alternative Models

  1. Model: 71T75802S166BGG7

    • Manufacturer: XYZ Corporation
    • Similar specifications and features as 71T75802S166BGG8

  2. Model: ATmega328P

    • Manufacturer: Microchip Technology
    • Lower clock speed and memory compared to 71T75802S166BGG8, but widely used in Arduino boards.

  3. Model: STM32F407VGT6

    • Manufacturer: STMicroelectronics
    • Higher clock speed and more advanced features compared to 71T75802S166BGG8, suitable for demanding applications.

These alternative models offer different trade-offs in terms

技術ソリューションにおける 71T75802S166BGG8 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of 71T75802S166BGG8 in technical solutions:

  1. Q: What is 71T75802S166BGG8? A: 71T75802S166BGG8 is a specific type of solder wire used for electrical and electronic applications.

  2. Q: What are the main features of 71T75802S166BGG8? A: It has excellent electrical conductivity, high melting point, good thermal stability, and low flux residue.

  3. Q: What are the typical applications of 71T75802S166BGG8? A: It is commonly used for soldering components on printed circuit boards (PCBs), electrical connections, and electronic devices.

  4. Q: Is 71T75802S166BGG8 suitable for both leaded and lead-free applications? A: Yes, 71T75802S166BGG8 can be used for both leaded and lead-free soldering processes.

  5. Q: Does 71T75802S166BGG8 require any special storage conditions? A: It is recommended to store 71T75802S166BGG8 in a cool, dry place away from direct sunlight to maintain its quality.

  6. Q: Can 71T75802S166BGG8 be used for high-temperature applications? A: Yes, 71T75802S166BGG8 has a high melting point, making it suitable for high-temperature soldering applications.

  7. Q: Does 71T75802S166BGG8 contain any hazardous substances? A: No, 71T75802S166BGG8 is typically formulated to be free from hazardous substances like lead and other harmful chemicals.

  8. Q: What is the recommended soldering temperature for 71T75802S166BGG8? A: The recommended soldering temperature range for 71T75802S166BGG8 is typically between 250°C and 350°C.

  9. Q: Can 71T75802S166BGG8 be used with automated soldering equipment? A: Yes, 71T75802S166BGG8 is compatible with various soldering methods, including manual soldering and automated soldering machines.

  10. Q: Are there any specific safety precautions to consider when using 71T75802S166BGG8? A: It is important to follow general soldering safety practices, such as wearing appropriate protective gear, working in a well-ventilated area, and avoiding direct contact with molten solder.

Please note that the specific product code mentioned (71T75802S166BGG8) is fictional and used for illustrative purposes.