8N3QV01LG-1088CDI8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Timing and Frequency Control
• Characteristics: High precision, low power consumption
• Package: QFN (Quad Flat No-leads)
• Essence: Clock Generator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 1.8V to 3.3V
• Output Frequency Range: 10MHz to 1.5GHz
• Output Type: LVPECL (Low Voltage Positive Emitter-Coupled Logic)
• Operating Temperature Range: -40°C to +85°C
• Phase Noise: -150dBc/Hz at 100kHz offset
• Package Dimensions: 4mm x 4mm

Detailed Pin Configuration

1. VDD: Power supply input
2. GND: Ground reference
3. OUT0: LVPECL output 0
4. OUT1: LVPECL output 1
5. OE: Output enable control
6. SEL: Frequency selection input
7. NC: No connection
8. NC: No connection

Functional Features

• Wide frequency range with high accuracy
• Low phase noise for improved signal quality
• Flexible frequency selection through SEL pin
• Output enable/disable control for power management
• Compact package size for space-constrained applications

Advantages

• High precision timing control for critical applications
• Low power consumption for energy-efficient designs
• Small form factor enables integration in compact devices
• Wide operating temperature range for versatile usage

Disadvantages

• Limited output options (only LVPECL)
• Not suitable for low-frequency applications
• Relatively higher cost compared to standard clock generators

Working Principles

The 8N3QV01LG-1088CDI8 is a clock generator IC that generates precise timing signals for various electronic systems. It utilizes an internal crystal oscillator and frequency dividers to generate output frequencies within the specified range. The SEL pin allows users to select the desired frequency, while the OE pin enables or disables the output. The IC operates on a low supply voltage and consumes minimal power.

Detailed Application Field Plans

The 8N3QV01LG-1088CDI8 finds applications in a wide range of fields, including: 1. Telecommunications: Timing control in network equipment, base stations, and routers. 2. Data Centers: Synchronization of servers, switches, and storage devices. 3. Automotive: Clock generation for infotainment systems, advanced driver-assistance systems (ADAS), and engine control units (ECUs). 4. Industrial Automation: Timing synchronization in PLCs (Programmable Logic Controllers), motor drives, and robotics. 5. Consumer Electronics: Timing control in smart TVs, gaming consoles, and audio/video equipment.

Detailed and Complete Alternative Models

1. 8N3QV01LG-1099CDI8: Similar specifications with additional features like spread spectrum modulation.
2. 8N3QV02LG-1088CDI8: Dual-channel clock generator with independent frequency selection for each channel.
3. 8N3QV03LG-1088CDI8: Clock generator with integrated voltage-controlled oscillator (VCO) for wider frequency range.

(Note: These alternative models are fictional and provided for illustrative purposes only.)

This encyclopedia entry provides comprehensive information about the 8N3QV01LG-1088CDI8 clock generator IC. Its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are covered in detail.