Infineon Technologies
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
IRF1010ZLPBF
詳細を表示 DataSheets

IRF1010ZLPBF

Product Overview

Category

The IRF1010ZLPBF belongs to the category of power MOSFETs.

Use

It is commonly used for switching and amplification applications in various electronic circuits.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Package

The IRF1010ZLPBF is typically available in a TO-220AB package.

Essence

This MOSFET is essential for controlling high-power loads in electronic devices.

Packaging/Quantity

It is usually packaged in tubes or reels, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (Vdss): 55V
  • Continuous Drain Current (Id): 84A
  • RDS(ON) (Max) @ VGS = 10V: 12mΩ
  • Gate-Source Voltage (Vgs): ±20V
  • Power Dissipation (Pd): 110W

Detailed Pin Configuration

The IRF1010ZLPBF has a standard pin configuration with three pins: gate, drain, and source. The pinout is as follows: - Pin 1 (Gate) - Pin 2 (Drain) - Pin 3 (Source)

Functional Features

  • High voltage capability allows for use in various power applications.
  • Low on-resistance minimizes power loss and improves efficiency.
  • Fast switching speed enables rapid response in switching circuits.

Advantages and Disadvantages

Advantages

  • High voltage capability suitable for power applications
  • Low on-resistance for reduced power dissipation
  • Fast switching speed for efficient circuit operation

Disadvantages

  • May require careful handling due to sensitivity to static electricity
  • Higher cost compared to lower-rated MOSFETs

Working Principles

The IRF1010ZLPBF operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. By modulating the gate-source voltage, the MOSFET can effectively switch high currents in electronic circuits.

Detailed Application Field Plans

The IRF1010ZLPBF finds extensive use in the following application fields: - Switching power supplies - Motor control circuits - Audio amplifiers - LED lighting systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the IRF1010ZLPBF include: - IRF1010E - IRF1010EZ - IRF1010N - IRF1010NPBF

In conclusion, the IRF1010ZLPBF power MOSFET offers high voltage capability, low on-resistance, and fast switching speed, making it suitable for a wide range of power control and amplification applications.

[Word count: 411]

技術ソリューションにおける IRF1010ZLPBF の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum drain-source voltage of IRF1010ZLPBF?

    • The maximum drain-source voltage of IRF1010ZLPBF is 55 volts.

  2. What is the continuous drain current rating of IRF1010ZLPBF?

    • The continuous drain current rating of IRF1010ZLPBF is 84 amperes.

  3. What is the on-state resistance (RDS(on)) of IRF1010ZLPBF?

    • The on-state resistance (RDS(on)) of IRF1010ZLPBF is typically 12 milliohms at VGS = 10V.

  4. Can IRF1010ZLPBF be used in automotive applications?

    • Yes, IRF1010ZLPBF is suitable for use in automotive applications.

  5. What is the operating temperature range of IRF1010ZLPBF?

    • The operating temperature range of IRF1010ZLPBF is -55°C to 175°C.

  6. Is IRF1010ZLPBF RoHS compliant?

    • Yes, IRF1010ZLPBF is RoHS compliant, meaning it meets the Restriction of Hazardous Substances directive.

  7. What is the gate threshold voltage of IRF1010ZLPBF?

    • The gate threshold voltage of IRF1010ZLPBF is typically 2-4 volts.

  8. Can IRF1010ZLPBF be used in switching power supply applications?

    • Yes, IRF1010ZLPBF can be used in switching power supply applications.

  9. What package type does IRF1010ZLPBF come in?

    • IRF1010ZLPBF comes in a TO-220AB package.

  10. Does IRF1010ZLPBF have built-in protection features?

    • IRF1010ZLPBF does not have built-in protection features and may require external circuitry for overcurrent or overvoltage protection.