Infineon Technologies
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
TLE98322QVXUMA2

TLE98322QVXUMA2

Product Overview

Category

TLE98322QVXUMA2 belongs to the category of integrated circuits (ICs).

Use

This IC is primarily used for motor control applications.

Characteristics

  • Package: QFN-48
  • Essence: Integrated motor controller and driver
  • Packaging/Quantity: Available in tape and reel packaging, with a quantity of 250 units per reel

Specifications

The TLE98322QVXUMA2 has the following specifications:

  • Supply voltage range: 4.5V to 18V
  • Operating temperature range: -40°C to +150°C
  • Maximum output current: 1.5A
  • Number of PWM channels: 3
  • Number of half-bridge outputs: 2
  • Communication interface: SPI

Detailed Pin Configuration

The pin configuration of TLE98322QVXUMA2 is as follows:

  1. VCC
  2. GND
  3. IN1
  4. IN2
  5. IN3
  6. IN4
  7. OUT1
  8. OUT2
  9. OUT3
  10. OUT4
  11. CS
  12. SCLK
  13. MISO
  14. MOSI
  15. EN
  16. DIAG
  17. FAULT
  18. REF
  19. VCP
  20. VCP
  21. VCP
  22. VCP
  23. VCP
  24. VCP
  25. VCP
  26. VCP
  27. VCP
  28. VCP
  29. VCP
  30. VCP
  31. VCP
  32. VCP
  33. VCP
  34. VCP
  35. VCP
  36. VCP
  37. VCP
  38. VCP
  39. VCP
  40. VCP
  41. VCP
  42. VCP
  43. VCP
  44. VCP
  45. VCP
  46. VCP
  47. VCP
  48. VCP

Functional Features

The TLE98322QVXUMA2 offers the following functional features:

  • Integrated motor controller and driver in a single package
  • Three PWM channels for precise motor control
  • Two half-bridge outputs for driving motors in both directions
  • SPI communication interface for easy integration with microcontrollers
  • Fault detection and diagnostic capabilities

Advantages and Disadvantages

Advantages

  • Compact and integrated solution for motor control applications
  • High output current capability of 1.5A
  • Wide supply voltage range allows flexibility in system design
  • Fault detection and diagnostic features enhance system reliability

Disadvantages

  • Limited number of PWM channels may restrict the complexity of motor control algorithms
  • Operating temperature range may not be suitable for extreme environments

Working Principles

The TLE98322QVXUMA2 operates by receiving control signals through the SPI interface from a microcontroller. It generates PWM signals to control the speed and direction of the motor connected to its half-bridge outputs. The integrated fault detection circuitry monitors the motor's performance and provides diagnostic information through the FAULT pin.

Detailed Application Field Plans

The TLE98322QVXUMA2 is well-suited for various motor control applications, including:

  1. Robotics: Controlling motors in robotic systems for precise movement and manipulation.
  2. Automotive: Driving small motors in automotive subsystems such as power windows, sunroofs, and seat adjustments.
  3. Industrial Automation: Controlling motors in industrial machinery for conveyor belts, pumps, and actuators.
  4. Home Appliances: Driving motors in appliances like washing machines, dishwashers, and vacuum cleaners.

Detailed and Complete Alternative Models

  1. TLE98322QVXUMA1: Similar to TLE98322QVXUMA2 but with a different pin configuration.
  2. TLE98322QVXUMA3: Enhanced version with additional features such as current sensing and over-temperature protection.
  3. TLE98322QVXUMA4: Higher output current variant capable of driving motors up to 3A.

These alternative models provide options for different system requirements and can be considered based on specific application needs.

Word count: 550 words

技術ソリューションにおける TLE98322QVXUMA2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of TLE98322QVXUMA2 in technical solutions:

  1. Question: What is TLE98322QVXUMA2?
    Answer: TLE98322QVXUMA2 is a specific model number of an integrated circuit (IC) developed by Infineon Technologies. It is commonly used in automotive applications.

  2. Question: What are the main features of TLE98322QVXUMA2?
    Answer: Some key features of TLE98322QVXUMA2 include motor control, LIN communication interface, voltage regulator, and various protection mechanisms.

  3. Question: In which technical solutions can TLE98322QVXUMA2 be applied?
    Answer: TLE98322QVXUMA2 is often used in automotive systems such as power windows, sunroofs, seat adjustment, and other motor control applications.

  4. Question: How does TLE98322QVXUMA2 facilitate motor control?
    Answer: TLE98322QVXUMA2 integrates motor control functions like pulse-width modulation (PWM) generation, current sensing, and diagnostics, making it easier to implement motor control in automotive systems.

  5. Question: Can TLE98322QVXUMA2 communicate with other devices?
    Answer: Yes, TLE98322QVXUMA2 includes a LIN communication interface, allowing it to communicate with other LIN-enabled devices in the vehicle.

  6. Question: What kind of protection mechanisms does TLE98322QVXUMA2 offer?
    Answer: TLE98322QVXUMA2 provides protection against overvoltage, undervoltage, overtemperature, and short circuits, ensuring the safety and reliability of the system.

  7. Question: Is TLE98322QVXUMA2 suitable for battery-powered applications?
    Answer: Yes, TLE98322QVXUMA2 has a built-in voltage regulator that can handle a wide range of input voltages, making it suitable for battery-powered applications.

  8. Question: Can TLE98322QVXUMA2 be programmed or configured?
    Answer: Yes, TLE98322QVXUMA2 can be programmed and configured using dedicated software tools provided by Infineon Technologies.

  9. Question: Are there any application examples where TLE98322QVXUMA2 is commonly used?
    Answer: Yes, TLE98322QVXUMA2 is often used in automotive applications such as power window control modules, seat control modules, and HVAC systems.

  10. Question: Where can I find more information about TLE98322QVXUMA2?
    Answer: You can find detailed technical documentation, datasheets, and application notes on the official website of Infineon Technologies or by contacting their customer support.