Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
HIP6004DCR-T
詳細を表示 DataSheets

HIP6004DCR-T

Product Overview

Category

HIP6004DCR-T belongs to the category of integrated circuits (ICs).

Use

The HIP6004DCR-T is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

The HIP6004DCR-T is available in a small outline package (SOP) format.

Essence

The essence of HIP6004DCR-T lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

The HIP6004DCR-T is typically packaged in reels and comes in quantities of 2500 units per reel.

Specifications

The specifications for HIP6004DCR-T are as follows:

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to VIN
  • Maximum Output Current: 4A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of HIP6004DCR-T is as follows:

  1. VIN: Input voltage
  2. GND: Ground
  3. EN: Enable pin
  4. FB: Feedback pin
  5. COMP: Compensation pin
  6. SS: Soft-start pin
  7. PGND: Power ground
  8. VOUT: Output voltage

Functional Features

The HIP6004DCR-T offers the following functional features:

  • Wide input voltage range
  • High output current capability
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start function

Advantages and Disadvantages

Advantages of using HIP6004DCR-T include:

  • High efficiency power management
  • Compact size for space-constrained applications
  • Wide input voltage range for versatility

Disadvantages of using HIP6004DCR-T include:

  • Limited maximum output current compared to some other ICs
  • Relatively high switching frequency may require additional filtering components

Working Principles

HIP6004DCR-T operates based on a pulse width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the internal power switch.

Detailed Application Field Plans

HIP6004DCR-T finds applications in various fields, including:

  1. Consumer electronics: Power management in smartphones, tablets, and portable devices.
  2. Industrial equipment: Efficient power distribution in automation systems and machinery.
  3. Automotive electronics: Voltage regulation in automotive infotainment systems and lighting controls.
  4. Telecommunications: Power management in networking equipment and base stations.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to HIP6004DCR-T are:

  1. LM2576-ADJ: Adjustable voltage regulator with a wide input voltage range.
  2. LT1763-5: Low dropout voltage regulator with high output current capability.
  3. TPS5430: Synchronous buck converter with adjustable output voltage.

These alternative models can be considered depending on specific application requirements.

Word count: 430 words

技術ソリューションにおける HIP6004DCR-T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of HIP6004DCR-T in technical solutions:

  1. Q: What is HIP6004DCR-T? A: HIP6004DCR-T is a high-performance, synchronous buck controller IC designed for use in various power supply applications.

  2. Q: What is the input voltage range supported by HIP6004DCR-T? A: HIP6004DCR-T supports an input voltage range of 4.5V to 60V.

  3. Q: What is the output voltage range that can be achieved using HIP6004DCR-T? A: The output voltage range achievable with HIP6004DCR-T depends on the external components used, but it typically ranges from 0.8V to 24V.

  4. Q: Can HIP6004DCR-T handle high current loads? A: Yes, HIP6004DCR-T is capable of driving high current loads with its integrated MOSFET drivers.

  5. Q: Does HIP6004DCR-T offer any protection features? A: Yes, HIP6004DCR-T provides various protection features such as overvoltage protection (OVP), undervoltage lockout (UVLO), and thermal shutdown.

  6. Q: Is HIP6004DCR-T suitable for automotive applications? A: Yes, HIP6004DCR-T is designed to meet the requirements of automotive applications and is qualified to AEC-Q100 Grade 1 standards.

  7. Q: Can I synchronize multiple HIP6004DCR-T controllers together? A: Yes, HIP6004DCR-T supports synchronization of multiple controllers to achieve phase shifting and reduce input/output ripple.

  8. Q: What type of control method does HIP6004DCR-T use? A: HIP6004DCR-T utilizes voltage mode control for regulating the output voltage.

  9. Q: Can I adjust the switching frequency of HIP6004DCR-T? A: Yes, the switching frequency of HIP6004DCR-T can be adjusted using external resistors and capacitors.

  10. Q: What is the typical efficiency of HIP6004DCR-T? A: The efficiency of HIP6004DCR-T depends on various factors such as input/output voltage, load current, and external components used, but it typically achieves high efficiency levels above 90%.

Please note that these answers are general and may vary depending on specific application requirements and design considerations.