Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
HIP6004DCRZ
詳細を表示 DataSheets

HIP6004DCRZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: DCRZ
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Output Current: Up to 4A
  • Switching Frequency: 1.5MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The HIP6004DCRZ has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. SS: Soft-Start Pin
  6. PGND: Power Ground
  7. SW: Switch Node
  8. VOUT: Output Voltage

Functional Features

  • High efficiency voltage regulation
  • Low power consumption
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and overtemperature protection
  • Soft-start for controlled startup

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power loss - Wide input voltage range allows for versatile applications - Adjustable output voltage provides flexibility - Overcurrent and overtemperature protection ensure device safety - Soft-start feature prevents inrush current during startup

Disadvantages: - Limited output current capacity (up to 4A)

Working Principles

The HIP6004DCRZ is a voltage regulator IC that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.8V and 3.6V. It achieves this by utilizing a switching regulator topology, which offers high efficiency and low power consumption.

The IC incorporates various control mechanisms to maintain stable output voltage despite changes in input voltage or load conditions. These include feedback control, overcurrent protection, and overtemperature protection.

During startup, the soft-start feature gradually increases the output voltage to prevent excessive inrush current, ensuring a controlled and safe power-up sequence.

Detailed Application Field Plans

The HIP6004DCRZ is commonly used in various applications, including but not limited to:

  1. Portable electronic devices
  2. Battery-powered systems
  3. IoT (Internet of Things) devices
  4. Embedded systems
  5. Automotive electronics
  6. Industrial automation

Its ability to efficiently regulate voltage while consuming minimal power makes it suitable for applications where energy efficiency is crucial.

Detailed and Complete Alternative Models

  1. LM2596S-ADJ: Adjustable Voltage Regulator, 3A Output Current
  2. LT1763CS8-3.3: Fixed Voltage Regulator, 3.3V Output, Low Dropout
  3. TPS54331DR: Synchronous Buck Converter, 3A Output Current
  4. MAX5033DASA+: Step-Down Switching Regulator, 2.5A Output Current
  5. ADP2302ARDZ-5.0-R7: Fixed Voltage Regulator, 5V Output, High Efficiency

These alternative models offer similar functionality and can be considered as substitutes for the HIP6004DCRZ based on specific application requirements.

In conclusion, the HIP6004DCRZ is a voltage regulator IC that provides efficient and reliable power management for various electronic devices. Its high efficiency, adjustable output voltage, and built-in protection features make it a versatile choice for a wide range of applications.

技術ソリューションにおける HIP6004DCRZ の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of HIP6004DCRZ in technical solutions:

  1. Q: What is HIP6004DCRZ? A: HIP6004DCRZ is a high-performance synchronous buck controller IC used for voltage regulation in various technical applications.

  2. Q: What is the input voltage range supported by HIP6004DCRZ? A: The input voltage range supported by HIP6004DCRZ is typically between 4.5V and 60V.

  3. Q: What is the output voltage range that can be achieved using HIP6004DCRZ? A: The output voltage range achievable with HIP6004DCRZ depends on the external components used, but it can typically range from 0.8V to 55V.

  4. Q: What is the maximum output current that can be handled by HIP6004DCRZ? A: HIP6004DCRZ can handle a maximum output current of up to 20A, depending on the thermal design and external components used.

  5. Q: Can HIP6004DCRZ support multiple outputs? A: Yes, HIP6004DCRZ can support multiple outputs by using additional power stages or converters.

  6. Q: Does HIP6004DCRZ have any built-in protection features? A: Yes, HIP6004DCRZ includes various protection features such as overvoltage protection (OVP), undervoltage lockout (UVLO), and thermal shutdown.

  7. Q: What type of control method does HIP6004DCRZ use? A: HIP6004DCRZ uses voltage mode control, which provides good transient response and stability.

  8. Q: Can HIP6004DCRZ be used in automotive applications? A: Yes, HIP6004DCRZ is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 qualification.

  9. Q: What is the typical efficiency of HIP6004DCRZ? A: The efficiency of HIP6004DCRZ depends on various factors such as input/output voltage, load current, and external components used. However, it can achieve high efficiencies above 90%.

  10. Q: Are there any evaluation boards or reference designs available for HIP6004DCRZ? A: Yes, Intersil (now Renesas Electronics) provides evaluation boards and reference designs for HIP6004DCRZ, which can help in the development and testing of technical solutions.

Please note that the answers provided here are general and may vary depending on specific application requirements and design considerations.