Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
HIP6013CB
詳細を表示 DataSheets

HIP6013CB

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: Ceramic Ball Grid Array (CBGA)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The HIP6013CB has a total of 16 pins. The pin configuration is as follows:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. COMP: Compensation Pin
  6. SS/TR: Soft-Start/Tracking Pin
  7. VCC: Supply Voltage
  8. PGND: Power Ground
  9. BOOT: Bootstrap Capacitor Connection
  10. LX: Switch Node
  11. BST: Boost Capacitor Connection
  12. AGND: Analog Ground
  13. OCSET: Overcurrent Protection Threshold Setting
  14. SS/TR: Soft-Start/Tracking Pin
  15. VSENSE: Current Sense Input
  16. VOUT: Output Voltage

Functional Features

  • High Efficiency: The HIP6013CB utilizes advanced control techniques to achieve high efficiency power conversion.
  • Low Power Consumption: The integrated circuit minimizes power losses, resulting in reduced energy consumption.
  • Overcurrent Protection: The OCSET pin allows for setting the threshold at which the device shuts down to protect against excessive current.

Advantages and Disadvantages

Advantages

  • High efficiency power conversion
  • Low power consumption
  • Overcurrent protection for enhanced safety

Disadvantages

  • Limited input voltage range (4.5V to 28V)
  • Maximum output current limited to 3A

Working Principles

The HIP6013CB is a voltage regulator that converts the input voltage to a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output.

Detailed Application Field Plans

The HIP6013CB is commonly used in various applications, including:

  1. Power Supplies: The voltage regulator is suitable for powering electronic devices, such as computers, telecommunication equipment, and industrial machinery.
  2. Automotive Electronics: The device can be utilized in automotive applications, providing stable power for various systems, including infotainment, lighting, and sensors.
  3. Consumer Electronics: The HIP6013CB finds application in consumer electronics, such as smartphones, tablets, and gaming consoles, ensuring reliable power delivery.

Detailed and Complete Alternative Models

  1. HIP6012CB: Similar to HIP6013CB but with a lower maximum output current of 2A.
  2. HIP6014CB: Similar to HIP6013CB but with a higher maximum output current of 4A.
  3. HIP6015CB: Similar to HIP6013CB but with an extended input voltage range of 4.5V to 36V.

These alternative models provide flexibility in choosing a voltage regulator based on specific requirements.

Word count: 407 words

技術ソリューションにおける HIP6013CB の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of HIP6013CB in technical solutions:

  1. Q: What is HIP6013CB? A: HIP6013CB is a high-performance, synchronous buck controller IC used in power supply applications.

  2. Q: What is the input voltage range supported by HIP6013CB? A: HIP6013CB supports an input voltage range of 4.5V to 28V.

  3. Q: What is the output voltage range that can be achieved using HIP6013CB? A: The output voltage range achievable with HIP6013CB is typically from 0.8V to 5.5V.

  4. Q: Can HIP6013CB handle high current loads? A: Yes, HIP6013CB is designed to handle high current loads, making it suitable for various power-hungry applications.

  5. Q: Does HIP6013CB have built-in protection features? A: Yes, HIP6013CB incorporates several protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown.

  6. Q: Is HIP6013CB suitable for battery-powered applications? A: Yes, HIP6013CB is well-suited for battery-powered applications due to its low quiescent current and high efficiency.

  7. Q: Can HIP6013CB operate in a wide temperature range? A: Yes, HIP6013CB has a wide operating temperature range of -40°C to +85°C, making it suitable for various environments.

  8. Q: What control methods does HIP6013CB support? A: HIP6013CB supports both voltage mode control and current mode control, providing flexibility in different applications.

  9. Q: Can HIP6013CB be used in parallel to increase output current? A: Yes, HIP6013CB can be easily configured in parallel to increase the output current capability.

  10. Q: What are some typical applications of HIP6013CB? A: HIP6013CB is commonly used in various technical solutions such as servers, telecom equipment, industrial systems, and high-performance computing.

Please note that these answers are general and may vary depending on the specific implementation and requirements of the technical solution.