Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
HIP6013CBZ
詳細を表示 DataSheets

HIP6013CBZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: CBZ Package
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Output Current: Up to 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The HIP6013CBZ has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. EN: Enable pin to control the device's operation
  5. SS/TR: Soft-start/Tracking pin for controlling the startup behavior
  6. VCC: Supply voltage pin
  7. PGND: Power ground pin
  8. SW: Switching node pin connected to the inductor

Functional Features

  • High efficiency power conversion
  • Low power consumption in standby mode
  • Overcurrent protection
  • Thermal shutdown protection
  • Adjustable output voltage through feedback pin
  • Soft-start function for controlled startup
  • Tracking function for sequencing multiple regulators

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power dissipation - Wide input voltage range allows for versatile applications - Compact CBZ package enables space-saving designs - Overcurrent and thermal protection enhance reliability

Disadvantages: - Limited output current compared to some other models - Higher cost compared to non-integrated solutions

Working Principles

The HIP6013CBZ is a voltage regulator IC that utilizes a synchronous buck converter topology. It takes an input voltage within the specified range and converts it to a regulated output voltage. The device uses high-frequency switching to efficiently step down the input voltage, minimizing power loss. The feedback pin allows for precise output voltage regulation, while the soft-start and tracking functions ensure controlled startup and sequencing in multi-regulator systems.

Detailed Application Field Plans

The HIP6013CBZ is commonly used in various applications, including but not limited to: - Power supplies for computer peripherals - Networking equipment - Industrial control systems - Telecommunications devices - Consumer electronics

Detailed and Complete Alternative Models

  1. LM2596S-ADJ: Adjustable Buck Converter IC
  2. LT1763-5: Low Dropout Regulator IC
  3. TPS54331: Synchronous Step-Down Converter IC
  4. MAX15062: High-Efficiency Step-Down Converter IC
  5. ADP2384: Programmable DC-DC Converter IC

These alternative models offer similar functionality and can be considered as substitutes for the HIP6013CBZ depending on specific requirements and design constraints.

Word count: 305 words

技術ソリューションにおける HIP6013CBZ の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of HIP6013CBZ in technical solutions:

  1. Q: What is HIP6013CBZ? A: HIP6013CBZ is a high-performance, synchronous buck controller IC used in power supply applications.

  2. Q: What is the input voltage range supported by HIP6013CBZ? A: The input voltage range supported by HIP6013CBZ is typically between 4.5V and 18V.

  3. Q: What is the output voltage range that can be achieved using HIP6013CBZ? A: The output voltage range that can be achieved using HIP6013CBZ depends on the external components used, but it is typically between 0.8V and 5.5V.

  4. Q: Can HIP6013CBZ handle high current loads? A: Yes, HIP6013CBZ is designed to handle high current loads with its integrated MOSFET drivers and high switching frequency capability.

  5. Q: What is the maximum switching frequency supported by HIP6013CBZ? A: The maximum switching frequency supported by HIP6013CBZ is typically around 1MHz.

  6. Q: Does HIP6013CBZ have any protection features? A: Yes, HIP6013CBZ includes various protection features such as overvoltage protection (OVP), undervoltage lockout (UVLO), and thermal shutdown.

  7. Q: Can HIP6013CBZ operate in a wide temperature range? A: Yes, HIP6013CBZ is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  8. Q: Is HIP6013CBZ suitable for battery-powered applications? A: Yes, HIP6013CBZ is suitable for battery-powered applications due to its low quiescent current and high efficiency.

  9. Q: Can HIP6013CBZ be used in both step-up and step-down voltage conversion applications? A: No, HIP6013CBZ is specifically designed for step-down (buck) voltage conversion applications.

  10. Q: What are some typical applications of HIP6013CBZ? A: Some typical applications of HIP6013CBZ include power supplies for computer peripherals, networking equipment, industrial automation, and telecommunications devices.

Please note that the answers provided here are general and may vary depending on specific design considerations and requirements.