Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL6310CRZ
詳細を表示 DataSheets

ISL6310CRZ

Product Overview

Category

ISL6310CRZ belongs to the category of integrated circuits (ICs).

Use

The ISL6310CRZ is commonly used as a voltage regulator in various electronic devices.

Characteristics

  • Voltage regulation capability
  • Compact package size
  • High efficiency
  • Low power consumption

Package

ISL6310CRZ is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6310CRZ lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

ISL6310CRZ is typically sold in reels containing a quantity of 250 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.6V to 5.5V
  • Maximum Output Current: 10A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Switching Frequency: 300kHz to 1MHz

Detailed Pin Configuration

The ISL6310CRZ has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. EN: Enable pin for turning the device on/off
  6. VCC: Supply voltage pin
  7. PGND: Power ground pin
  8. LX: Switching node pin for connecting the inductor

Functional Features

  • Wide input voltage range for versatile applications
  • High output current capability for powering demanding loads
  • Adjustable output voltage for flexibility
  • Overcurrent protection for enhanced safety
  • Thermal shutdown protection to prevent overheating
  • Soft-start feature to minimize inrush current

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Compact package size allows for space-saving designs
  • Wide input voltage range accommodates various power sources
  • Overcurrent and thermal protection enhance reliability

Disadvantages

  • Limited output current compared to some other models
  • Higher cost compared to non-integrated solutions

Working Principles

The ISL6310CRZ operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the internal switching transistor. This control mechanism ensures that the desired output voltage is maintained within the specified range, even with varying input voltages and load conditions.

Detailed Application Field Plans

The ISL6310CRZ finds applications in various electronic devices, including but not limited to: - Desktop computers - Servers - Industrial equipment - Telecommunications systems - Power supplies

Detailed and Complete Alternative Models

  1. ISL6332: Similar voltage regulator IC with higher output current capability (15A)
  2. ISL6218: Voltage regulator IC with lower output current capability (5A) but lower cost
  3. ISL62882: Dual-channel voltage regulator IC for multi-rail power supply designs

These alternative models offer different specifications and features, allowing designers to choose the most suitable option for their specific requirements.

In conclusion, the ISL6310CRZ is a versatile voltage regulator IC that offers high efficiency, compact size, and reliable performance. Its wide input voltage range and adjustable output voltage make it suitable for various applications. While it has certain limitations, alternative models are available to address specific needs.

技術ソリューションにおける ISL6310CRZ の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL6310CRZ in technical solutions:

  1. Q: What is ISL6310CRZ? A: ISL6310CRZ is a highly integrated single-phase PWM controller designed for advanced synchronous rectified buck DC-DC applications.

  2. Q: What are the key features of ISL6310CRZ? A: The key features of ISL6310CRZ include adjustable switching frequency, programmable soft-start, overcurrent protection, and thermal shutdown.

  3. Q: What is the typical input voltage range for ISL6310CRZ? A: The typical input voltage range for ISL6310CRZ is between 4.5V and 28V.

  4. Q: What is the maximum output current that ISL6310CRZ can handle? A: ISL6310CRZ can handle a maximum output current of up to 20A.

  5. Q: Can ISL6310CRZ be used in both step-up and step-down applications? A: No, ISL6310CRZ is specifically designed for step-down (buck) applications.

  6. Q: Does ISL6310CRZ have built-in protection features? A: Yes, ISL6310CRZ has built-in overcurrent protection and thermal shutdown features to ensure safe operation.

  7. Q: What is the operating temperature range for ISL6310CRZ? A: The operating temperature range for ISL6310CRZ is typically between -40°C and +85°C.

  8. Q: Can ISL6310CRZ be used in automotive applications? A: Yes, ISL6310CRZ is suitable for automotive applications as it meets the necessary automotive standards.

  9. Q: Does ISL6310CRZ require an external compensation network? A: No, ISL6310CRZ has an internal compensation network, eliminating the need for an external one.

  10. Q: What is the package type of ISL6310CRZ? A: ISL6310CRZ is available in a 20-lead QFN (Quad Flat No-Lead) package.

Please note that these answers are general and may vary depending on the specific application and requirements.