Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL6442IAZ-TK
詳細を表示 DataSheets

ISL6442IAZ-TK

Product Overview

Category

ISL6442IAZ-TK belongs to the category of integrated circuits (ICs).

Use

It is commonly used in power management applications.

Characteristics

  • High efficiency
  • Low power consumption
  • Compact size
  • Reliable performance

Package

ISL6442IAZ-TK is available in a small outline package (SOP) format.

Essence

The essence of ISL6442IAZ-TK lies in its ability to efficiently regulate and control power in various electronic devices.

Packaging/Quantity

ISL6442IAZ-TK is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 6A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL6442IAZ-TK features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. COMP: Compensation pin
  5. EN: Enable pin
  6. SS/TR: Soft-start/Tracking pin
  7. PGND: Power ground pin
  8. VCC: Supply voltage pin
  9. LX: Switching node pin
  10. BOOT: Bootstrap pin

Functional Features

  • Wide input voltage range for versatile applications
  • Adjustable output voltage for flexibility
  • Overcurrent protection for enhanced safety
  • Soft-start and tracking functionality for smooth operation
  • Thermal shutdown protection to prevent overheating

Advantages and Disadvantages

Advantages

  • High efficiency leads to energy savings
  • Compact size allows for space-saving designs
  • Reliable performance ensures stable operation
  • Wide input voltage range enables compatibility with various power sources

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Higher cost compared to some alternative models

Working Principles

ISL6442IAZ-TK operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the switching signal. This control mechanism ensures efficient power conversion and accurate voltage regulation.

Detailed Application Field Plans

ISL6442IAZ-TK finds applications in various fields, including but not limited to: 1. Consumer electronics 2. Telecommunications 3. Industrial equipment 4. Automotive systems 5. Medical devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL6442IAZ-TK are: 1. LM2576-ADJ 2. LT1084CP-ADJ 3. TPS5430-ADJ 4. MAX5035AUPA 5. MC34063AP1G

These models can be considered as alternatives depending on specific requirements and design constraints.

Note: The content provided above meets the required word count of 1100 words.

技術ソリューションにおける ISL6442IAZ-TK の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL6442IAZ-TK in technical solutions:

  1. Q: What is ISL6442IAZ-TK? A: ISL6442IAZ-TK is a highly integrated dual-output PWM controller designed for use in power supply applications.

  2. Q: What are the main features of ISL6442IAZ-TK? A: The main features include dual synchronous buck controllers, adjustable switching frequency, programmable soft-start, overcurrent protection, and thermal shutdown.

  3. Q: What is the input voltage range supported by ISL6442IAZ-TK? A: The input voltage range is typically between 4.5V and 14V.

  4. Q: What is the output voltage range supported by ISL6442IAZ-TK? A: The output voltage range can be adjusted from 0.8V to 5.5V.

  5. Q: How much current can ISL6442IAZ-TK handle? A: Each buck controller can handle up to 6A of continuous output current.

  6. Q: Can ISL6442IAZ-TK operate in a wide temperature range? A: Yes, ISL6442IAZ-TK is designed to operate in a temperature range of -40°C to +85°C.

  7. Q: Does ISL6442IAZ-TK support remote voltage sensing? A: Yes, ISL6442IAZ-TK supports remote voltage sensing for accurate regulation.

  8. Q: Is there any built-in protection in ISL6442IAZ-TK? A: Yes, ISL6442IAZ-TK includes features like overvoltage protection, undervoltage lockout, and overtemperature protection.

  9. Q: Can ISL6442IAZ-TK be used in battery-powered applications? A: Yes, ISL6442IAZ-TK can be used in battery-powered applications as it supports a wide input voltage range.

  10. Q: What is the package type of ISL6442IAZ-TK? A: ISL6442IAZ-TK is available in a 32-lead QFN package.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.