Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL6563IRZ
詳細を表示 DataSheets

ISL6563IRZ

Product Overview

Category

ISL6563IRZ belongs to the category of integrated circuits (ICs).

Use

The ISL6563IRZ is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

ISL6563IRZ is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6563IRZ lies in its ability to efficiently manage power in various applications.

Packaging/Quantity

ISL6563IRZ is typically packaged in reels and comes in quantities of 2500 units per reel.

Specifications

  • Input voltage range: 4.5V to 28V
  • Output voltage range: 0.6V to 5.5V
  • Maximum output current: 20A
  • Switching frequency: 300kHz to 1MHz
  • Operating temperature range: -40°C to +125°C

Pin Configuration

The ISL6563IRZ has the following pin configuration:

  1. VIN: Input voltage
  2. BOOT: Bootstrap capacitor connection
  3. VCC: Supply voltage for internal control circuitry
  4. GND: Ground reference
  5. LGATE: Low-side MOSFET gate driver output
  6. PGND: Power ground
  7. PHASE: Phase node connection
  8. FB: Feedback voltage input
  9. COMP: Compensation network connection
  10. SS: Soft-start capacitor connection
  11. RT: Timing resistor connection
  12. SYNC: Synchronization input
  13. OCSET: Overcurrent protection threshold setting
  14. EN: Enable control input
  15. VREF: Reference voltage output
  16. VSENSE: Current sense input

Functional Features

  • Integrated high-side and low-side MOSFET drivers
  • Adjustable switching frequency
  • Overcurrent protection
  • Soft-start functionality
  • Synchronization capability

Advantages and Disadvantages

Advantages

  • High efficiency power management
  • Compact size for space-constrained applications
  • Integrated MOSFET drivers simplify circuit design
  • Adjustable switching frequency allows optimization for different applications

Disadvantages

  • Limited maximum output current of 20A
  • Operating temperature range may not be suitable for extreme environments

Working Principles

The ISL6563IRZ operates by regulating the input voltage and converting it to the desired output voltage using a high-side and low-side MOSFET driver. The integrated circuit incorporates various control features such as overcurrent protection, soft-start, and synchronization to ensure efficient and reliable power management.

Detailed Application Field Plans

The ISL6563IRZ is widely used in the following application fields:

  1. Power supplies for computer systems
  2. Industrial automation equipment
  3. Telecommunications infrastructure
  4. Automotive electronics
  5. Renewable energy systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the ISL6563IRZ include:

  1. LTC3780: Integrated synchronous buck-boost DC/DC converter
  2. TPS54332: Step-down (buck) converter with integrated MOSFETs
  3. MAX15062: High-efficiency, synchronous step-down converter
  4. LM5118: Wide input voltage range synchronous buck controller

These alternative models provide comparable power management capabilities and can be considered based on specific application requirements.

Word count: 410 words

技術ソリューションにおける ISL6563IRZ の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL6563IRZ in technical solutions:

  1. Question: What is ISL6563IRZ?
    Answer: ISL6563IRZ is a high-performance dual synchronous buck controller designed for advanced computer power systems.

  2. Question: What is the input voltage range supported by ISL6563IRZ?
    Answer: The input voltage range supported by ISL6563IRZ is typically between 4.5V and 24V.

  3. Question: What is the output voltage range that can be achieved using ISL6563IRZ?
    Answer: The output voltage range can be adjusted from 0.6V to 5.5V using ISL6563IRZ.

  4. Question: Can ISL6563IRZ support multiple phases for higher current applications?
    Answer: Yes, ISL6563IRZ can be configured to support up to 6 phases, allowing for higher current handling capabilities.

  5. Question: Does ISL6563IRZ have built-in protection features?
    Answer: Yes, ISL6563IRZ includes various protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  6. Question: What is the maximum switching frequency supported by ISL6563IRZ?
    Answer: The maximum switching frequency supported by ISL6563IRZ is typically around 1MHz.

  7. Question: Can ISL6563IRZ operate in a synchronous rectification mode?
    Answer: Yes, ISL6563IRZ supports synchronous rectification mode, which improves efficiency and reduces power losses.

  8. Question: Is there any adjustable soft-start feature in ISL6563IRZ?
    Answer: Yes, ISL6563IRZ includes an adjustable soft-start feature, allowing for controlled startup of the power system.

  9. Question: Can ISL6563IRZ be used in both single-phase and multi-phase applications?
    Answer: Yes, ISL6563IRZ is versatile and can be used in both single-phase and multi-phase applications.

  10. Question: What are some typical applications of ISL6563IRZ?
    Answer: ISL6563IRZ is commonly used in desktop computers, servers, gaming systems, and other high-performance computing applications.

Please note that these answers are general and may vary depending on specific implementation requirements and datasheet specifications.