画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL9000IRFJZ

ISL9000IRFJZ

Product Overview

Category

ISL9000IRFJZ belongs to the category of integrated voltage regulators.

Use

It is primarily used for voltage regulation in electronic devices and systems.

Characteristics

  • Integrated voltage regulator
  • Provides stable output voltage
  • Efficient power management solution
  • Compact package size
  • High reliability and performance

Package

ISL9000IRFJZ comes in a small form factor package, suitable for surface mount applications.

Essence

The essence of ISL9000IRFJZ lies in its ability to regulate voltage efficiently and reliably, ensuring proper functioning of electronic devices.

Packaging/Quantity

ISL9000IRFJZ is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.6V to 3.6V
  • Output Current: Up to 1A
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 25µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL9000IRFJZ has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • Low dropout voltage ensures efficient power conversion.
  • Enable pin provides control over the regulator's operation.
  • Feedback pin enables precise voltage regulation.
  • Output voltage pin delivers regulated voltage to the load.

Advantages and Disadvantages

Advantages

  • High efficiency power management solution
  • Compact package size for space-constrained applications
  • Wide input voltage range for versatility
  • Low dropout voltage for efficient power conversion

Disadvantages

  • Limited output current capacity (up to 1A)
  • Operating temperature range may not be suitable for extreme environments

Working Principles

ISL9000IRFJZ operates based on the principle of voltage regulation. It takes an input voltage within the specified range and converts it into a stable output voltage, ensuring proper functioning of the connected electronic devices.

Detailed Application Field Plans

ISL9000IRFJZ finds application in various electronic devices and systems, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices - IoT devices - Industrial automation systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL9000IRFJZ are: - LM1117-3.3 - LT1763-3.3 - TPS7A4700

These models offer similar functionality and characteristics, providing options for different design requirements.

In conclusion, ISL9000IRFJZ is an integrated voltage regulator that offers efficient and reliable voltage regulation for electronic devices. With its compact size and wide input voltage range, it is suitable for various applications. However, it has limitations in terms of output current capacity and operating temperature range. Alternative models such as LM1117-3.3, LT1763-3.3, and TPS7A4700 can be considered based on specific design needs.

技術ソリューションにおける ISL9000IRFJZ の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL9000IRFJZ in technical solutions:

  1. Question: What is ISL9000IRFJZ?
    Answer: ISL9000IRFJZ is a specific model of voltage regulator IC (integrated circuit) manufactured by Renesas Electronics. It is designed for use in various technical solutions.

  2. Question: What is the input voltage range supported by ISL9000IRFJZ?
    Answer: The input voltage range supported by ISL9000IRFJZ is typically between 2.5V and 5.5V.

  3. Question: What is the output voltage range provided by ISL9000IRFJZ?
    Answer: The output voltage range provided by ISL9000IRFJZ can be adjusted from 0.8V to 3.6V.

  4. Question: What is the maximum output current capability of ISL9000IRFJZ?
    Answer: The maximum output current capability of ISL9000IRFJZ is typically around 300mA.

  5. Question: Can ISL9000IRFJZ operate in low-power modes?
    Answer: Yes, ISL9000IRFJZ supports low-power modes such as shutdown and standby, which help conserve energy when the device is not in active use.

  6. Question: Is ISL9000IRFJZ suitable for battery-powered applications?
    Answer: Yes, ISL9000IRFJZ is well-suited for battery-powered applications due to its low quiescent current and efficient power management features.

  7. Question: Does ISL9000IRFJZ have built-in protection features?
    Answer: Yes, ISL9000IRFJZ incorporates various protection features such as overcurrent protection, thermal shutdown, and reverse current protection.

  8. Question: Can ISL9000IRFJZ be used in automotive applications?
    Answer: Yes, ISL9000IRFJZ is automotive-grade and can be used in automotive applications that require stable voltage regulation.

  9. Question: What are the typical applications of ISL9000IRFJZ?
    Answer: ISL9000IRFJZ is commonly used in portable devices, IoT (Internet of Things) devices, industrial equipment, and other electronic systems that require precise voltage regulation.

  10. Question: Are there any evaluation boards or reference designs available for ISL9000IRFJZ?
    Answer: Yes, Renesas Electronics provides evaluation boards and reference designs to help developers quickly integrate ISL9000IRFJZ into their technical solutions and evaluate its performance.

Please note that the answers provided here are general and may vary depending on specific product specifications and application requirements. It is always recommended to refer to the official documentation and datasheets for accurate and up-to-date information.