Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL9014AIRJCZ-T
詳細を表示 DataSheets

ISL9014AIRJCZ-T

Product Overview

Category

ISL9014AIRJCZ-T belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

ISL9014AIRJCZ-T comes in a small package, typically a 10-pin QFN (Quad Flat No-Lead) package.

Essence

The essence of ISL9014AIRJCZ-T lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

ISL9014AIRJCZ-T is usually packaged in reels or tubes, with a quantity of around 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.8V to VIN
  • Dropout Voltage: 200mV at 300mA load current
  • Quiescent Current: 17µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. EN (Enable)
  2. GND (Ground)
  3. FB (Feedback)
  4. VOUT (Output Voltage)
  5. VOUT (Output Voltage)
  6. VOUT (Output Voltage)
  7. VOUT (Output Voltage)
  8. VIN (Input Voltage)
  9. VIN (Input Voltage)
  10. VIN (Input Voltage)

Functional Features

  • Enable pin for turning the regulator on/off
  • Feedback pin for adjusting the output voltage
  • Multiple output voltage pins for flexibility in circuit design
  • Low quiescent current for power-saving applications
  • Overcurrent and thermal protection for device safety

Advantages and Disadvantages

Advantages

  • High efficiency ensures minimal power loss
  • Wide input voltage range allows compatibility with various power sources
  • Adjustable output voltage provides flexibility in different applications
  • Overcurrent and thermal protection safeguards the device and circuitry

Disadvantages

  • Dropout voltage may limit its use in low-power applications
  • Limited output current capacity compared to other voltage regulators

Working Principles

ISL9014AIRJCZ-T operates based on the principle of linear voltage regulation. It takes an input voltage from a power source and regulates it to provide a stable output voltage. The regulator uses feedback control to adjust the output voltage according to the desired value set by the user.

Detailed Application Field Plans

ISL9014AIRJCZ-T finds applications in various electronic devices and systems, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT (Internet of Things) devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL9014AIRJCZ-T are: - LM317 - LT1083 - TPS7A4700 - ADP3339

These models offer similar functionality and characteristics, providing options for designers based on their specific requirements.

Word count: 345 words

技術ソリューションにおける ISL9014AIRJCZ-T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL9014AIRJCZ-T in technical solutions:

  1. Q: What is the ISL9014AIRJCZ-T? A: The ISL9014AIRJCZ-T is a low dropout voltage regulator designed for use in various technical solutions.

  2. Q: What is the input voltage range of the ISL9014AIRJCZ-T? A: The input voltage range of the ISL9014AIRJCZ-T is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage range of the ISL9014AIRJCZ-T? A: The output voltage range of the ISL9014AIRJCZ-T can be adjusted from 0.8V to 3.6V.

  4. Q: What is the maximum output current of the ISL9014AIRJCZ-T? A: The maximum output current of the ISL9014AIRJCZ-T is typically 300mA.

  5. Q: Is the ISL9014AIRJCZ-T suitable for battery-powered applications? A: Yes, the ISL9014AIRJCZ-T is well-suited for battery-powered applications due to its low dropout voltage and low quiescent current.

  6. Q: Does the ISL9014AIRJCZ-T have built-in thermal shutdown protection? A: Yes, the ISL9014AIRJCZ-T includes built-in thermal shutdown protection to prevent overheating.

  7. Q: Can the ISL9014AIRJCZ-T operate in a wide temperature range? A: Yes, the ISL9014AIRJCZ-T is designed to operate in a temperature range of -40°C to +85°C.

  8. Q: Does the ISL9014AIRJCZ-T require any external components for operation? A: Yes, the ISL9014AIRJCZ-T requires a few external components such as input and output capacitors for stable operation.

  9. Q: Can the ISL9014AIRJCZ-T be used in automotive applications? A: Yes, the ISL9014AIRJCZ-T is qualified for automotive applications and meets the AEC-Q100 standard.

  10. Q: Is there any documentation available for the ISL9014AIRJCZ-T? A: Yes, detailed documentation including datasheets, application notes, and reference designs are available from the manufacturer's website.