Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL9014AIRLLZ-T
詳細を表示 DataSheets

ISL9014AIRLLZ-T

Product Overview

Category

ISL9014AIRLLZ-T belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

ISL9014AIRLLZ-T comes in a small package, typically a 10-pin DFN (Dual Flat No-Lead) package.

Essence

The essence of ISL9014AIRLLZ-T lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

ISL9014AIRLLZ-T is usually packaged in reels or tubes, with a quantity of around 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.8V to VIN
  • Dropout Voltage: 200mV at 300mA load current
  • Quiescent Current: 17µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. EN: Enable pin (Active High)
  2. GND: Ground pin
  3. FB: Feedback pin
  4. VOUT: Output voltage pin
  5. VIN: Input voltage pin
  6. NC: No Connection
  7. NC: No Connection
  8. NC: No Connection
  9. NC: No Connection
  10. PG: Power Good pin

Functional Features

  • High efficiency conversion
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Power good indicator

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Adjustable output voltage provides flexibility
  • Overcurrent and thermal protection ensure device safety

Disadvantages

  • Dropout voltage may limit the use in low voltage applications
  • Limited pin configuration options

Working Principles

ISL9014AIRLLZ-T operates based on a switching regulator topology. It uses an internal control loop to maintain a stable output voltage, regardless of input voltage fluctuations. The feedback pin (FB) is used to monitor the output voltage and adjust the duty cycle of the internal switch accordingly.

Detailed Application Field Plans

ISL9014AIRLLZ-T finds applications in various fields, including but not limited to: - Portable electronic devices - Battery-powered systems - IoT (Internet of Things) devices - Wearable technology - Industrial automation

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL9014AIRLLZ-T are: - LM317: A popular linear voltage regulator with adjustable output voltage. - LT1763: A low dropout voltage regulator with high accuracy. - TPS7A4700: An ultra-low noise, high PSRR (Power Supply Rejection Ratio) voltage regulator.

These alternative models offer similar functionalities and can be chosen based on specific requirements and preferences.

Word count: 366 words

技術ソリューションにおける ISL9014AIRLLZ-T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL9014AIRLLZ-T in technical solutions:

  1. Q: What is ISL9014AIRLLZ-T? A: ISL9014AIRLLZ-T is a low dropout voltage regulator (LDO) designed for use in various technical solutions.

  2. Q: What is the input voltage range of ISL9014AIRLLZ-T? A: The input voltage range of ISL9014AIRLLZ-T is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage range of ISL9014AIRLLZ-T? A: The output voltage range of ISL9014AIRLLZ-T can be adjusted from 0.8V to 3.6V using external resistors.

  4. Q: What is the maximum output current of ISL9014AIRLLZ-T? A: The maximum output current of ISL9014AIRLLZ-T is typically 300mA.

  5. Q: Is ISL9014AIRLLZ-T suitable for battery-powered applications? A: Yes, ISL9014AIRLLZ-T is well-suited for battery-powered applications due to its low quiescent current and low dropout voltage.

  6. Q: Can ISL9014AIRLLZ-T handle high input voltages? A: No, ISL9014AIRLLZ-T is not designed to handle high input voltages. It is recommended to stay within the specified input voltage range.

  7. Q: Does ISL9014AIRLLZ-T have built-in thermal shutdown protection? A: Yes, ISL9014AIRLLZ-T features built-in thermal shutdown protection to prevent overheating.

  8. Q: Can ISL9014AIRLLZ-T operate in a wide temperature range? A: Yes, ISL9014AIRLLZ-T is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  9. Q: Does ISL9014AIRLLZ-T require any external components for operation? A: Yes, ISL9014AIRLLZ-T requires input and output capacitors for stability and proper operation.

  10. Q: What are some typical applications of ISL9014AIRLLZ-T? A: ISL9014AIRLLZ-T can be used in various technical solutions such as portable devices, IoT applications, wearables, and other low-power systems that require stable voltage regulation.

Please note that the answers provided here are general and may vary depending on specific design requirements and application scenarios.