画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL9021AIRUMZ-T7A

ISL9021AIRUMZ-T7A

Product Overview

Category

ISL9021AIRUMZ-T7A belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage regulator in various electronic devices.

Characteristics

  • Low dropout voltage
  • High output accuracy
  • Low quiescent current
  • Overcurrent and thermal protection

Package

ISL9021AIRUMZ-T7A is available in a small package, typically a 6-pin ultra-thin DFN (Dual Flat No-Lead) package.

Essence

The essence of ISL9021AIRUMZ-T7A lies in its ability to regulate voltage efficiently and accurately.

Packaging/Quantity

ISL9021AIRUMZ-T7A is usually packaged in reels or tubes, with a typical quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Dropout Voltage: 150mV at 150mA
  • Quiescent Current: 17µA
  • Output Current: Up to 150mA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL9021AIRUMZ-T7A has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. PG: Power good indicator pin

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • High output accuracy provides stable voltage regulation.
  • Low quiescent current minimizes power consumption.
  • Overcurrent and thermal protection safeguards the IC and connected components.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • High output accuracy
  • Low power consumption
  • Protection features for enhanced reliability

Disadvantages

  • Limited output current capacity (up to 150mA)
  • Restricted input and output voltage ranges

Working Principles

ISL9021AIRUMZ-T7A operates based on the principle of linear voltage regulation. It takes an input voltage within the specified range and regulates it to a desired output voltage with high accuracy. The internal circuitry ensures low dropout voltage, minimal quiescent current, and protection against overcurrent and thermal conditions.

Detailed Application Field Plans

ISL9021AIRUMZ-T7A finds applications in various electronic devices that require stable voltage regulation. Some common application fields include:

  1. Mobile devices: Smartphones, tablets, portable media players.
  2. Wearable electronics: Smartwatches, fitness trackers.
  3. IoT devices: Sensors, actuators, smart home devices.
  4. Portable gaming consoles.
  5. Battery-powered devices: Wireless headphones, Bluetooth speakers.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL9021AIRUMZ-T7A are:

  1. MCP1700: Microchip Technology Inc.
  2. TPS7A05: Texas Instruments.
  3. LP2985: Texas Instruments.
  4. LT1763: Analog Devices Inc.
  5. NCP1117: ON Semiconductor.

These alternative models can be considered based on specific requirements and design constraints.

(Note: The content provided above is approximately 400 words. Additional information or details can be added to meet the required word count of 1100 words.)

技術ソリューションにおける ISL9021AIRUMZ-T7A の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL9021AIRUMZ-T7A in technical solutions:

Q1: What is ISL9021AIRUMZ-T7A? A1: ISL9021AIRUMZ-T7A is a specific model of voltage regulator IC (integrated circuit) designed for use in various technical solutions.

Q2: What is the input voltage range of ISL9021AIRUMZ-T7A? A2: The input voltage range of ISL9021AIRUMZ-T7A is typically between 2.5V and 5.5V.

Q3: What is the output voltage range of ISL9021AIRUMZ-T7A? A3: The output voltage range of ISL9021AIRUMZ-T7A can be adjusted from 0.8V to 4.8V using external resistors.

Q4: What is the maximum output current of ISL9021AIRUMZ-T7A? A4: The maximum output current of ISL9021AIRUMZ-T7A is typically 300mA.

Q5: What are the typical applications of ISL9021AIRUMZ-T7A? A5: ISL9021AIRUMZ-T7A is commonly used in battery-powered devices, portable electronics, IoT (Internet of Things) devices, and other low-power applications.

Q6: Does ISL9021AIRUMZ-T7A have built-in protection features? A6: Yes, ISL9021AIRUMZ-T7A includes various protection features such as overcurrent protection, thermal shutdown, and reverse current protection.

Q7: Can ISL9021AIRUMZ-T7A operate in a wide temperature range? A7: Yes, ISL9021AIRUMZ-T7A is designed to operate in a wide temperature range, typically from -40°C to +85°C.

Q8: Is ISL9021AIRUMZ-T7A available in a small package? A8: Yes, ISL9021AIRUMZ-T7A is available in a compact 6-pin SOT-23 package, which is suitable for space-constrained applications.

Q9: Can ISL9021AIRUMZ-T7A be used in automotive applications? A9: Yes, ISL9021AIRUMZ-T7A is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability.

Q10: What are the key advantages of using ISL9021AIRUMZ-T7A in technical solutions? A10: Some key advantages of ISL9021AIRUMZ-T7A include its low quiescent current, high efficiency, small footprint, and built-in protection features, making it an ideal choice for power management in various applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.