Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL95859AIRTZ

ISL95859AIRTZ

Product Overview

Category

ISL95859AIRTZ belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in power management applications.

Characteristics

  • Package: The ISL95859AIRTZ is available in a small outline package (SOP) with a thermal pad.
  • Essence: This IC is designed to provide efficient power management solutions.
  • Packaging/Quantity: It is typically sold in reels or tubes, with a quantity of 2500 units per reel.

Specifications

The ISL95859AIRTZ has the following specifications:

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 0.5V to 5.5V
  • Maximum Output Current: 20A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The detailed pin configuration of ISL95859AIRTZ is as follows:

  1. VIN: Input voltage
  2. GND: Ground
  3. VCC: Power supply for internal circuitry
  4. BOOT: Bootstrap capacitor connection
  5. PHASE: Phase node connection
  6. COMP: Compensation pin for feedback control
  7. FB: Feedback voltage input
  8. LGATE: Low-side MOSFET gate driver output
  9. PGND: Power ground
  10. SW: Switching node connection
  11. PGATE: High-side MOSFET gate driver output
  12. VSENSE: Current sense input
  13. ISET: Output current setting
  14. SS: Soft-start capacitor connection
  15. EN: Enable pin
  16. RT: External resistor for switching frequency adjustment

Functional Features

The ISL95859AIRTZ offers the following functional features:

  • High efficiency power conversion
  • Integrated MOSFET drivers
  • Adjustable output voltage and current
  • Overcurrent protection
  • Soft-start capability
  • Enable/disable control

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Integrated MOSFET drivers simplify circuit design - Adjustable output voltage and current provide flexibility - Overcurrent protection enhances system reliability - Soft-start capability prevents inrush current

Disadvantages: - Limited maximum output current (20A) - Requires careful thermal management due to high power dissipation

Working Principles

The ISL95859AIRTZ operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the switching signal. This IC uses integrated MOSFET drivers to drive the power switches efficiently.

Detailed Application Field Plans

The ISL95859AIRTZ is widely used in various applications, including but not limited to:

  1. Power supplies for computer systems
  2. Industrial automation equipment
  3. Telecommunications infrastructure
  4. Automotive electronics
  5. LED lighting systems

Alternative Models

Here are some alternative models that can be considered as alternatives to the ISL95859AIRTZ:

  1. ISL95859BIRTZ
  2. ISL95859CIRTZ
  3. ISL95859DIRTZ
  4. ISL95859EIRTZ

These models offer similar functionality and can be suitable replacements depending on specific requirements.

In conclusion, the ISL95859AIRTZ is a versatile integrated circuit used for efficient power management. Its adjustable output voltage and current, along with integrated MOSFET drivers, make it an excellent choice for various applications. However, it is important to consider its limitations, such as the maximum output current and thermal management requirements.

技術ソリューションにおける ISL95859AIRTZ の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL95859AIRTZ in technical solutions:

  1. Q: What is ISL95859AIRTZ? A: ISL95859AIRTZ is a voltage regulator IC (Integrated Circuit) designed for power management in various technical solutions.

  2. Q: What are the key features of ISL95859AIRTZ? A: Some key features of ISL95859AIRTZ include high efficiency, wide input voltage range, multiple output channels, and programmable voltage levels.

  3. Q: What technical solutions can benefit from ISL95859AIRTZ? A: ISL95859AIRTZ can be used in a wide range of applications such as laptops, desktop computers, servers, industrial equipment, and embedded systems.

  4. Q: How many output channels does ISL95859AIRTZ have? A: ISL95859AIRTZ has three output channels, making it suitable for powering multiple components or subsystems in a technical solution.

  5. Q: Can ISL95859AIRTZ handle different input voltages? A: Yes, ISL95859AIRTZ has a wide input voltage range, typically from 4.5V to 24V, allowing it to work with various power sources.

  6. Q: Is ISL95859AIRTZ programmable? A: Yes, ISL95859AIRTZ offers programmable voltage levels through its integrated digital interface, enabling customization based on specific requirements.

  7. Q: What is the efficiency of ISL95859AIRTZ? A: ISL95859AIRTZ provides high efficiency power conversion, typically above 90%, which helps reduce energy consumption and heat generation.

  8. Q: Can ISL95859AIRTZ handle high power loads? A: Yes, ISL95859AIRTZ is designed to handle high power loads, making it suitable for demanding applications that require efficient power management.

  9. Q: Does ISL95859AIRTZ have built-in protection features? A: Yes, ISL95859AIRTZ incorporates various protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown to ensure safe operation.

  10. Q: Where can I find more information about ISL95859AIRTZ? A: You can refer to the datasheet and application notes provided by the manufacturer or visit their official website for detailed information on ISL95859AIRTZ.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.