Linear Technology/QD Devices
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LT1083CP-12#PBF
詳細を表示 DataSheets

LT1083CP-12#PBF

Product Overview

Category

The LT1083CP-12#PBF belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision and accuracy
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

The LT1083CP-12#PBF comes in a TO-220 package, which is a widely used through-hole package for power semiconductors.

Essence

The essence of the LT1083CP-12#PBF lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

The product is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 3.5V to 30V
  • Output Voltage Range: 1.25V to 28V
  • Output Current: Up to 7.5A
  • Dropout Voltage: 1.5V (typical)
  • Line Regulation: 0.015% (typical)
  • Load Regulation: 0.1% (typical)
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LT1083CP-12#PBF has three pins:

  1. IN: This pin is used to connect the input voltage.
  2. OUT: This pin provides the regulated output voltage.
  3. ADJ: This pin is used to adjust the output voltage.

Functional Features

  • Voltage Regulation: The LT1083CP-12#PBF ensures a stable and precise output voltage regardless of variations in input voltage or load conditions.
  • Overcurrent Protection: It incorporates overcurrent protection to safeguard the circuit from excessive current flow.
  • Thermal Protection: The device includes thermal protection to prevent damage due to excessive heat.

Advantages and Disadvantages

Advantages

  • High precision and accuracy in voltage regulation
  • Wide input voltage range allows for versatile applications
  • Low dropout voltage minimizes power dissipation
  • Overcurrent and thermal protection enhance circuit reliability

Disadvantages

  • Relatively large package size compared to surface-mount alternatives
  • Limited output current compared to some high-power regulators

Working Principles

The LT1083CP-12#PBF operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved through a combination of error amplification, voltage reference, and pass transistor control.

Detailed Application Field Plans

The LT1083CP-12#PBF finds extensive use in various electronic applications, including but not limited to: - Power supplies for audio amplifiers - Battery charging circuits - Industrial automation systems - Automotive electronics - Telecommunications equipment

Detailed and Complete Alternative Models

  1. LM317: A popular adjustable voltage regulator with similar characteristics.
  2. LT1084: A higher current variant of the LT1083CP-12#PBF.
  3. LM7805: A fixed 5V voltage regulator commonly used in low-power applications.

These alternative models offer different specifications and features, allowing users to choose the most suitable option based on their specific requirements.

In conclusion, the LT1083CP-12#PBF is a highly reliable voltage regulator that provides stable and accurate voltage regulation for a wide range of electronic applications. Its versatility, precision, and built-in protections make it a preferred choice among engineers and hobbyists alike.

Word count: 511

技術ソリューションにおける LT1083CP-12#PBF の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LT1083CP-12#PBF in technical solutions:

  1. Q: What is the LT1083CP-12#PBF? A: The LT1083CP-12#PBF is a linear voltage regulator IC that provides a fixed output voltage of 12V.

  2. Q: What is the input voltage range for the LT1083CP-12#PBF? A: The input voltage range for the LT1083CP-12#PBF is typically between 3V and 40V.

  3. Q: What is the maximum output current of the LT1083CP-12#PBF? A: The LT1083CP-12#PBF can provide a maximum output current of up to 7.5A.

  4. Q: Can the LT1083CP-12#PBF be used to regulate voltages other than 12V? A: Yes, the LT1083CP-12#PBF can be used to regulate other voltages by adjusting the feedback resistors.

  5. Q: Is the LT1083CP-12#PBF suitable for high-power applications? A: Yes, the LT1083CP-12#PBF is designed to handle high currents and is suitable for high-power applications.

  6. Q: Does the LT1083CP-12#PBF require any external components for operation? A: Yes, the LT1083CP-12#PBF requires input and output capacitors for stability and filtering.

  7. Q: What is the dropout voltage of the LT1083CP-12#PBF? A: The dropout voltage of the LT1083CP-12#PBF is typically around 1.5V.

  8. Q: Can the LT1083CP-12#PBF handle reverse polarity protection? A: No, the LT1083CP-12#PBF does not have built-in reverse polarity protection. External protection circuitry is required.

  9. Q: Is the LT1083CP-12#PBF suitable for automotive applications? A: Yes, the LT1083CP-12#PBF can be used in automotive applications as long as proper input and output protections are implemented.

  10. Q: What are some typical applications of the LT1083CP-12#PBF? A: The LT1083CP-12#PBF is commonly used in power supplies, battery chargers, audio amplifiers, and other electronic systems requiring a regulated 12V output.

Please note that these answers are general and may vary depending on specific application requirements and conditions.