Linear Technology/QD Devices
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LT1129CT-5#06PBF
詳細を表示 DataSheets

LT1129CT-5#06PBF

Product Overview

Category

LT1129CT-5#06PBF belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage Output: 5V
  • Package Type: TO-220
  • Essence: Linear regulator
  • Packaging/Quantity: Tape & Reel, 1000 units per reel

Specifications

The LT1129CT-5#06PBF voltage regulator has the following specifications:

  • Input Voltage Range: 2.7V to 15V
  • Output Voltage: 5V ±2%
  • Maximum Output Current: 800mA
  • Dropout Voltage: 300mV @ 800mA
  • Line Regulation: 0.02% (Typical)
  • Load Regulation: 0.1% (Typical)
  • Quiescent Current: 75µA (Typical)

Pin Configuration

The LT1129CT-5#06PBF has a standard TO-220 package with three pins:

  1. Pin 1: Input Voltage (VIN)
  2. Pin 2: Ground (GND)
  3. Pin 3: Output Voltage (VOUT)

Functional Features

  • Low dropout voltage for efficient regulation.
  • Internal thermal shutdown protection.
  • Short-circuit current limit for overcurrent protection.
  • Fast transient response for stable output voltage.

Advantages and Disadvantages

Advantages

  • High accuracy and stability in regulating voltage.
  • Low quiescent current consumption.
  • Wide input voltage range.
  • Built-in protection features.

Disadvantages

  • Limited maximum output current.
  • Dropout voltage may affect efficiency in low input voltage scenarios.

Working Principles

The LT1129CT-5#06PBF operates as a linear regulator. It uses a pass transistor to regulate the output voltage based on the difference between the input and desired output voltage. The internal circuitry ensures that the output voltage remains constant even with varying input voltages.

Detailed Application Field Plans

The LT1129CT-5#06PBF is suitable for various applications, including:

  1. Battery-powered devices: Provides stable voltage for portable electronics.
  2. Embedded systems: Regulates voltage for microcontrollers and other components.
  3. Automotive electronics: Ensures consistent power supply for vehicle systems.
  4. Industrial control systems: Stabilizes voltage in automation and control equipment.

Detailed and Complete Alternative Models

  1. LM317T: Similar voltage regulator with adjustable output voltage.
  2. LM7805: Fixed 5V voltage regulator with higher maximum output current.
  3. LT1086CT-5: Higher current linear regulator with lower dropout voltage.

These alternative models offer similar functionality and can be considered as substitutes for the LT1129CT-5#06PBF.

Word count: 345 words

技術ソリューションにおける LT1129CT-5#06PBF の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LT1129CT-5#06PBF in technical solutions:

  1. Q: What is the LT1129CT-5#06PBF? A: The LT1129CT-5#06PBF is a low dropout linear regulator IC that provides a fixed output voltage of 5V.

  2. Q: What is the input voltage range for the LT1129CT-5#06PBF? A: The input voltage range for the LT1129CT-5#06PBF is typically between 2.7V and 15V.

  3. Q: What is the maximum output current of the LT1129CT-5#06PBF? A: The LT1129CT-5#06PBF can provide a maximum output current of 800mA.

  4. Q: Can the LT1129CT-5#06PBF be used in battery-powered applications? A: Yes, the LT1129CT-5#06PBF is suitable for battery-powered applications due to its low dropout voltage and low quiescent current.

  5. Q: Does the LT1129CT-5#06PBF require any external components for operation? A: Yes, the LT1129CT-5#06PBF requires input and output capacitors for stability and proper operation.

  6. Q: What is the dropout voltage of the LT1129CT-5#06PBF? A: The dropout voltage of the LT1129CT-5#06PBF is typically around 300mV at full load.

  7. Q: Is the LT1129CT-5#06PBF protected against overcurrent and thermal shutdown? A: Yes, the LT1129CT-5#06PBF has built-in overcurrent protection and thermal shutdown features to ensure safe operation.

  8. Q: Can the LT1129CT-5#06PBF be used in automotive applications? A: Yes, the LT1129CT-5#06PBF is suitable for automotive applications as it meets the necessary requirements for automotive electronics.

  9. Q: What is the operating temperature range of the LT1129CT-5#06PBF? A: The LT1129CT-5#06PBF can operate within a temperature range of -40°C to 125°C.

  10. Q: Are there any recommended application circuits available for the LT1129CT-5#06PBF? A: Yes, the datasheet of the LT1129CT-5#06PBF provides several recommended application circuits that can be used as a reference for different scenarios.

Please note that these answers are general and may vary depending on specific design considerations and requirements. It is always recommended to refer to the datasheet and consult with an experienced engineer for accurate information and guidance.