LT1175CT#06PBF

Product Overview

Category

LT1175CT#06PBF belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

• Input Voltage Range: 4.2V to 60V
• Output Voltage Range: 1.25V to 57V
• Maximum Output Current: 500mA
• Low Dropout Voltage: 1.2V at 500mA
• Adjustable Output Voltage
• Thermal Shutdown Protection
• Short-Circuit Protection

Package

LT1175CT#06PBF comes in a TO-220 package.

Essence

The essence of LT1175CT#06PBF is to provide a stable and regulated output voltage for various electronic applications.

Packaging/Quantity

It is typically available in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

• Input Voltage Range: 4.2V to 60V
• Output Voltage Range: 1.25V to 57V
• Maximum Output Current: 500mA
• Dropout Voltage: 1.2V at 500mA
• Line Regulation: ±0.02% typical
• Load Regulation: ±0.04% typical
• Quiescent Current: 1.6mA typical
• Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

LT1175CT#06PBF has the following pin configuration:

1. VIN (Input Voltage)
2. GND (Ground)
3. VOUT (Output Voltage)

Functional Features

• Adjustable Output Voltage: The output voltage can be easily adjusted using external resistors.
• Thermal Shutdown Protection: It incorporates thermal shutdown circuitry to prevent overheating.
• Short-Circuit Protection: It has built-in protection against short-circuits, ensuring the safety of the circuit.

Advantages and Disadvantages

Advantages

• Wide input voltage range allows for versatile applications.
• Low dropout voltage ensures efficient power conversion.
• Adjustable output voltage provides flexibility.
• Thermal shutdown and short-circuit protection enhance reliability.

Disadvantages

• Maximum output current limited to 500mA, which may not be sufficient for high-power applications.
• Requires external resistors for adjusting the output voltage.

Working Principles

LT1175CT#06PBF operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The feedback mechanism ensures that the output voltage remains stable despite variations in the input voltage or load conditions.

Detailed Application Field Plans

LT1175CT#06PBF finds applications in various fields, including: 1. Power supply circuits for electronic devices 2. Battery-powered systems 3. Automotive electronics 4. Industrial control systems 5. Telecommunications equipment

Detailed and Complete Alternative Models

Some alternative models to LT1175CT#06PBF include: 1. LM317T 2. LM7805 3. LT1084CP-5 4. LM1117-ADJ 5. L78M05CV

These alternatives offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 389 words