Category: Integrated Circuit (IC)
Use: Voltage Regulator
Characteristics: - Low Dropout Voltage - Low Quiescent Current - High Output Voltage Accuracy - Thermal Shutdown Protection - Small Package Size
Package: SOT-23-5
Essence: The LT1761ES5-5#TRMPBF is a low dropout voltage regulator IC designed to provide a stable and accurate output voltage for various electronic devices.
Packaging/Quantity: The LT1761ES5-5#TRMPBF is typically packaged in reels containing 3000 units.
The LT1761ES5-5#TRMPBF has the following pin configuration:
```
| | --| V+ |-- --| |-- --| GND|-- --| |-- --| VOUT|-- |____| ```
The LT1761ES5-5#TRMPBF operates as a linear voltage regulator. It regulates the output voltage by maintaining a constant voltage drop across its internal pass transistor, regardless of changes in the input voltage or load conditions. The device uses feedback control to adjust the pass transistor's resistance, ensuring a stable output voltage.
The LT1761ES5-5#TRMPBF is commonly used in various electronic devices that require a stable and accurate 5V power supply. Some typical application fields include:
These alternative models offer similar functionality and can be considered as substitutes for the LT1761ES5-5#TRMPBF in specific applications.
Word count: 436
Sure! Here are 10 common questions and answers related to the application of LT1761ES5-5#TRMPBF in technical solutions:
Q1: What is the LT1761ES5-5#TRMPBF? A1: The LT1761ES5-5#TRMPBF is a low dropout (LDO) linear regulator IC that provides a fixed output voltage of 5V.
Q2: What is the input voltage range for the LT1761ES5-5#TRMPBF? A2: The input voltage range for the LT1761ES5-5#TRMPBF is typically between 2.7V and 20V.
Q3: What is the maximum output current of the LT1761ES5-5#TRMPBF? A3: The LT1761ES5-5#TRMPBF can provide a maximum output current of 500mA.
Q4: What is the dropout voltage of the LT1761ES5-5#TRMPBF? A4: The dropout voltage of the LT1761ES5-5#TRMPBF is typically around 300mV at full load.
Q5: Can the LT1761ES5-5#TRMPBF be used in battery-powered applications? A5: Yes, the LT1761ES5-5#TRMPBF is suitable for battery-powered applications due to its low dropout voltage and low quiescent current.
Q6: Is the LT1761ES5-5#TRMPBF short-circuit protected? A6: Yes, the LT1761ES5-5#TRMPBF has built-in short-circuit protection to prevent damage in case of a short circuit.
Q7: Can the LT1761ES5-5#TRMPBF be used in automotive applications? A7: Yes, the LT1761ES5-5#TRMPBF is designed to meet the requirements of automotive applications and can operate in a wide temperature range.
Q8: Does the LT1761ES5-5#TRMPBF require any external components for stability? A8: No, the LT1761ES5-5#TRMPBF is internally compensated and does not require any external components for stability.
Q9: What is the typical quiescent current of the LT1761ES5-5#TRMPBF? A9: The typical quiescent current of the LT1761ES5-5#TRMPBF is around 40µA.
Q10: Can the LT1761ES5-5#TRMPBF be used in noise-sensitive applications? A10: Yes, the LT1761ES5-5#TRMPBF has low output noise and is suitable for noise-sensitive applications such as audio circuits.
Please note that these answers are based on general information about the LT1761ES5-5#TRMPBF. It's always recommended to refer to the datasheet and consult with an expert for specific application requirements.