LT3013BEFE#PBF belongs to the category of voltage regulators.
It is used to regulate and stabilize voltage in electronic circuits.
LT3013BEFE#PBF comes in a TO-220 package.
The essence of LT3013BEFE#PBF is to provide a stable and regulated voltage supply for electronic devices.
It is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.
LT3013BEFE#PBF has the following pin configuration:
LT3013BEFE#PBF operates by comparing the output voltage with a reference voltage and adjusting the pass transistor accordingly. It uses feedback control to maintain a stable output voltage despite variations in input voltage and load conditions.
LT3013BEFE#PBF finds applications in various fields, including but not limited to: - Power supply circuits for microcontrollers and digital ICs - Battery-powered devices - Automotive electronics - Industrial control systems - Portable electronic devices
Some alternative models to LT3013BEFE#PBF are: - LM317T - LM1117-ADJ - LT1084CP-ADJ - ADP3339AKCZ-2.5-R7 - TPS7A4700RGWT
These models offer similar functionality and can be used as alternatives depending on specific requirements.
Word count: 346 words
Sure! Here are 10 common questions and answers related to the application of LT3013BEFE#PBF in technical solutions:
Q: What is the LT3013BEFE#PBF? A: The LT3013BEFE#PBF is a low dropout linear regulator IC manufactured by Analog Devices.
Q: What is the input voltage range of LT3013BEFE#PBF? A: The input voltage range of LT3013BEFE#PBF is from 2.5V to 20V.
Q: What is the output voltage range of LT3013BEFE#PBF? A: The output voltage range of LT3013BEFE#PBF is from 1.22V to 19.5V.
Q: What is the maximum output current of LT3013BEFE#PBF? A: The maximum output current of LT3013BEFE#PBF is 500mA.
Q: What is the dropout voltage of LT3013BEFE#PBF? A: The dropout voltage of LT3013BEFE#PBF is typically 300mV at full load.
Q: Can LT3013BEFE#PBF operate in a wide temperature range? A: Yes, LT3013BEFE#PBF can operate in a temperature range of -40°C to +125°C.
Q: Does LT3013BEFE#PBF have built-in thermal shutdown protection? A: Yes, LT3013BEFE#PBF has built-in thermal shutdown protection to prevent overheating.
Q: Is LT3013BEFE#PBF suitable for battery-powered applications? A: Yes, LT3013BEFE#PBF is suitable for battery-powered applications due to its low quiescent current.
Q: Can LT3013BEFE#PBF be used in automotive applications? A: Yes, LT3013BEFE#PBF is automotive qualified and can be used in automotive applications.
Q: What are some typical applications of LT3013BEFE#PBF? A: Some typical applications of LT3013BEFE#PBF include power supply for sensors, portable devices, industrial equipment, and automotive electronics.
Please note that the answers provided here are general and may vary depending on specific design requirements and conditions. It is always recommended to refer to the datasheet and consult with technical experts for accurate information and application-specific guidance.