Linear Technology/QD Devices
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LT3060IDC-1.5#TRPBF
詳細を表示 DataSheets

LT3060IDC-1.5#TRPBF

Product Overview

Category

The LT3060IDC-1.5#TRPBF belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation: The LT3060IDC-1.5#TRPBF provides a stable output voltage.
  • Low dropout voltage: It operates with a low dropout voltage, ensuring efficient power conversion.
  • High accuracy: This voltage regulator offers high precision in maintaining the desired output voltage.
  • Low noise: The LT3060IDC-1.5#TRPBF minimizes electrical noise interference during operation.

Package

The LT3060IDC-1.5#TRPBF comes in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of the LT3060IDC-1.5#TRPBF lies in its ability to regulate and stabilize voltage levels, ensuring reliable performance of electronic circuits.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 45V
  • Output Voltage: 1.5V
  • Dropout Voltage: 300mV at 100mA
  • Output Current: Up to 100mA
  • Line Regulation: ±0.02%
  • Load Regulation: ±0.1%
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LT3060IDC-1.5#TRPBF has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage Regulation: The LT3060IDC-1.5#TRPBF ensures a stable output voltage regardless of input voltage fluctuations.
  • Current Limiting: It incorporates current limiting protection to prevent damage to the device and connected components.
  • Thermal Shutdown: In case of excessive temperature, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • High accuracy in voltage regulation
  • Low dropout voltage for efficient power conversion
  • Small package size suitable for compact devices
  • Low noise interference during operation

Disadvantages

  • Limited output current capacity (up to 100mA)
  • Relatively higher quiescent current compared to some alternatives

Working Principles

The LT3060IDC-1.5#TRPBF operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through a combination of active and passive components within the voltage regulator.

Detailed Application Field Plans

The LT3060IDC-1.5#TRPBF finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

  1. LM1117-1.5: A popular alternative with similar specifications and performance characteristics.
  2. LT1763-1.5: Offers lower dropout voltage and higher output current capability.
  3. ADP3339-1.5: Provides enhanced thermal management features for improved reliability.

These alternative models can be considered based on specific application requirements and desired performance parameters.

Word count: 408 words

技術ソリューションにおける LT3060IDC-1.5#TRPBF の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LT3060IDC-1.5#TRPBF in technical solutions:

Q1: What is the LT3060IDC-1.5#TRPBF? A1: The LT3060IDC-1.5#TRPBF is a low dropout voltage linear regulator IC that provides a fixed output voltage of 1.5V.

Q2: What is the input voltage range for the LT3060IDC-1.5#TRPBF? A2: The input voltage range for the LT3060IDC-1.5#TRPBF is from 1.8V to 45V.

Q3: What is the maximum output current of the LT3060IDC-1.5#TRPBF? A3: The LT3060IDC-1.5#TRPBF can provide a maximum output current of 100mA.

Q4: Can the LT3060IDC-1.5#TRPBF be used in battery-powered applications? A4: Yes, the LT3060IDC-1.5#TRPBF is suitable for battery-powered applications due to its low dropout voltage and low quiescent current.

Q5: Is the LT3060IDC-1.5#TRPBF capable of handling high input voltages? A5: Yes, the LT3060IDC-1.5#TRPBF can handle input voltages up to 45V, making it suitable for various applications.

Q6: Does the LT3060IDC-1.5#TRPBF require any external components for operation? A6: Yes, the LT3060IDC-1.5#TRPBF requires a few external components such as input and output capacitors for stability.

Q7: Can the LT3060IDC-1.5#TRPBF be used in automotive applications? A7: Yes, the LT3060IDC-1.5#TRPBF is designed to meet automotive specifications, making it suitable for automotive applications.

Q8: What is the dropout voltage of the LT3060IDC-1.5#TRPBF? A8: The dropout voltage of the LT3060IDC-1.5#TRPBF is typically 300mV at full load.

Q9: Is the LT3060IDC-1.5#TRPBF available in different package options? A9: Yes, the LT3060IDC-1.5#TRPBF is available in various package options, including the DFN and TO-252.

Q10: Can the LT3060IDC-1.5#TRPBF be used in precision analog circuits? A10: Yes, the LT3060IDC-1.5#TRPBF has low output noise and high PSRR, making it suitable for precision analog circuit applications.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.