画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LT3062MPDCB#TRPBF

LT3062MPDCB#TRPBF

Product Overview

Category

LT3062MPDCB#TRPBF belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Wide input voltage range
  • Thermal shutdown protection

Package

LT3062MPDCB#TRPBF comes in a small form factor package, suitable for surface mount applications.

Essence

The essence of LT3062MPDCB#TRPBF lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 1.8V to 45V
  • Output Voltage Range: 0.6V to 44V
  • Dropout Voltage: 300mV at 500mA load current
  • Quiescent Current: 30μA
  • Line Regulation: ±0.02%
  • Load Regulation: ±0.1%
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. ADJ: Adjustable pin for setting the output voltage

Functional Features

  • High precision voltage regulation ensures stable output voltage.
  • Low dropout voltage allows efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption.
  • Wide input voltage range provides flexibility in various applications.
  • Thermal shutdown protection prevents damage due to excessive temperature.

Advantages

  • Precise voltage regulation ensures reliable performance of electronic devices.
  • Low dropout voltage enables efficient power conversion.
  • Low quiescent current reduces power consumption and extends battery life.
  • Wide input voltage range allows compatibility with different power sources.
  • Thermal shutdown protection enhances safety and reliability.

Disadvantages

  • Limited output current capability may not be suitable for high-power applications.
  • Higher cost compared to standard voltage regulators.
  • Requires additional external components for certain applications.

Working Principles

LT3062MPDCB#TRPBF operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of changes in input voltage or load conditions. This is achieved through a combination of voltage reference, error amplifier, pass transistor, and feedback loop.

Detailed Application Field Plans

LT3062MPDCB#TRPBF finds application in various fields, including:

  1. Portable electronic devices: Provides stable power supply for smartphones, tablets, and portable audio players.
  2. Industrial automation: Used in control systems to regulate voltage levels for sensors, actuators, and communication modules.
  3. Automotive electronics: Ensures reliable power supply for automotive infotainment systems, lighting, and other electronic components.
  4. Medical equipment: Used in medical devices to maintain precise voltage levels for patient monitoring, diagnostics, and therapy.
  5. Renewable energy systems: Regulates voltage in solar panels, wind turbines, and battery charging systems.

Detailed and Complete Alternative Models

  1. LT3080: Similar voltage regulator with higher output current capability.
  2. LM317: Widely used adjustable voltage regulator with lower precision but lower cost.
  3. TPS7A47: Ultra-low noise voltage regulator suitable for sensitive audio applications.
  4. ADP3339: High-performance voltage regulator with low dropout voltage and wide input voltage range.

These alternative models offer similar functionality and can be considered based on specific requirements and constraints.

In conclusion, LT3062MPDCB#TRPBF is a voltage regulator that provides precise and stable voltage output for various electronic applications. Its high precision, low dropout voltage, and wide input voltage range make it suitable for a wide range of applications. However, its limited output current capability and higher cost may be considered as disadvantages in certain scenarios.

技術ソリューションにおける LT3062MPDCB#TRPBF の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LT3062MPDCB#TRPBF in technical solutions:

  1. Q: What is the LT3062MPDCB#TRPBF? A: The LT3062MPDCB#TRPBF is a high-performance, low dropout linear regulator designed for use in various technical applications.

  2. Q: What is the input voltage range of the LT3062MPDCB#TRPBF? A: The input voltage range of the LT3062MPDCB#TRPBF is from 1.8V to 45V.

  3. Q: What is the output voltage range of the LT3062MPDCB#TRPBF? A: The output voltage range of the LT3062MPDCB#TRPBF is from 0.6V to 44V.

  4. Q: What is the maximum output current of the LT3062MPDCB#TRPBF? A: The LT3062MPDCB#TRPBF can provide a maximum output current of 200mA.

  5. Q: Is the LT3062MPDCB#TRPBF suitable for battery-powered applications? A: Yes, the LT3062MPDCB#TRPBF is suitable for battery-powered applications due to its low quiescent current and low dropout voltage.

  6. Q: Can the LT3062MPDCB#TRPBF handle high input voltages? A: Yes, the LT3062MPDCB#TRPBF can handle input voltages up to 45V, making it suitable for a wide range of applications.

  7. Q: Does the LT3062MPDCB#TRPBF have built-in thermal shutdown protection? A: Yes, the LT3062MPDCB#TRPBF has built-in thermal shutdown protection to prevent overheating and ensure safe operation.

  8. Q: Can the LT3062MPDCB#TRPBF be used in automotive applications? A: Yes, the LT3062MPDCB#TRPBF is automotive qualified and can be used in automotive applications that require a reliable and robust linear regulator.

  9. Q: Does the LT3062MPDCB#TRPBF require any external components for operation? A: Yes, the LT3062MPDCB#TRPBF requires a few external components such as input and output capacitors for stable operation.

  10. Q: What are some typical applications of the LT3062MPDCB#TRPBF? A: The LT3062MPDCB#TRPBF is commonly used in industrial control systems, instrumentation, automotive electronics, battery-powered devices, and other technical solutions where a low dropout linear regulator is required.

Please note that these answers are general and may vary depending on specific application requirements.