画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LT3694IUFD-1#TRPBF

LT3694IUFD-1#TRPBF

Introduction

The LT3694IUFD-1#TRPBF is a versatile integrated circuit belonging to the category of high voltage, high frequency synchronous step-down DC/DC converters. This device offers a wide range of applications and features that make it suitable for various electronic systems.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: High voltage, high frequency synchronous step-down DC/DC converter
  • Characteristics: Wide input voltage range, high efficiency, compact package
  • Package: 4mm x 5mm QFN-28
  • Essence: Efficient power management solution
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4V to 36V
  • Output Voltage Range: 0.8V to 24V
  • Switching Frequency: Up to 2MHz
  • Maximum Output Current: 3A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LT3694IUFD-1#TRPBF features a 28-pin QFN package with detailed pin configuration as follows: 1. VIN: Input Voltage 2. SW: Switch Node 3. PGND: Power Ground 4. AGND: Analog Ground 5. FB: Feedback 6. SYNC/MODE: Synchronization/MODE Selection 7. SS/TR/UVLO: Soft-Start/Tracking/Undervoltage Lockout 8. RT/CLKOUT: Timing Resistor/Clock Output 9. VCC: Bias Supply 10. BST: Bootstrap 11. LGATE: Low Side Gate Driver 12. PGND: Power Ground 13. PGND: Power Ground 14. PGND: Power Ground 15. PGND: Power Ground 16. PGND: Power Ground 17. PGND: Power Ground 18. PGND: Power Ground 19. PGND: Power Ground 20. PGND: Power Ground 21. PGND: Power Ground 22. PGND: Power Ground 23. PGND: Power Ground 24. PGND: Power Ground 25. PGND: Power Ground 26. PGND: Power Ground 27. PGND: Power Ground 28. PGND: Power Ground

Functional Features

  • High Efficiency: The LT3694IUFD-1#TRPBF offers up to 95% efficiency, ensuring minimal power loss.
  • Wide Input Voltage Range: With an input voltage range of 4V to 36V, this converter can accommodate various power sources.
  • Synchronous Rectification: Utilizes synchronous rectification for improved efficiency and reduced power dissipation.

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Compact package size

Disadvantages

  • Limited maximum output current (3A)

Working Principles

The LT3694IUFD-1#TRPBF operates on the principle of synchronous step-down conversion, where the input voltage is efficiently reduced to a lower output voltage while maintaining high efficiency through synchronous rectification.

Detailed Application Field Plans

The LT3694IUFD-1#TRPBF finds extensive application in various fields including: - Industrial automation - Automotive electronics - Telecommunications - Renewable energy systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the LT3694IUFD-1#TRPBF include: - LT3694-1 - LT3694-2 - LT3694-3 - LT3694-4

In conclusion, the LT3694IUFD-1#TRPBF is a highly efficient and versatile integrated circuit that serves as an essential component in numerous electronic systems, offering a reliable and compact solution for power management requirements.

Word Count: 497

技術ソリューションにおける LT3694IUFD-1#TRPBF の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the input voltage range of LT3694IUFD-1#TRPBF?

    • The input voltage range of LT3694IUFD-1#TRPBF is 2.7V to 4.5V.
  2. What is the output current capability of LT3694IUFD-1#TRPBF?

    • LT3694IUFD-1#TRPBF has an output current capability of up to 3A.
  3. What is the typical switching frequency of LT3694IUFD-1#TRPBF?

    • The typical switching frequency of LT3694IUFD-1#TRPBF is 1.2MHz.
  4. Can LT3694IUFD-1#TRPBF be used in automotive applications?

    • Yes, LT3694IUFD-1#TRPBF is suitable for automotive applications.
  5. What are the key features of LT3694IUFD-1#TRPBF?

    • Some key features of LT3694IUFD-1#TRPBF include a wide input voltage range, high output current capability, and a compact package.
  6. Is LT3694IUFD-1#TRPBF suitable for LED driver applications?

    • Yes, LT3694IUFD-1#TRPBF is commonly used in LED driver applications.
  7. What is the thermal resistance of LT3694IUFD-1#TRPBF?

    • The thermal resistance of LT3694IUFD-1#TRPBF is typically 50°C/W.
  8. Does LT3694IUFD-1#TRPBF have built-in overcurrent protection?

    • Yes, LT3694IUFD-1#TRPBF includes built-in overcurrent protection.
  9. What are the recommended input and output capacitors for LT3694IUFD-1#TRPBF?

    • The recommended input and output capacitors for LT3694IUFD-1#TRPBF are typically 10μF and 22μF, respectively.
  10. Is LT3694IUFD-1#TRPBF suitable for battery-powered applications?

    • Yes, LT3694IUFD-1#TRPBF is well-suited for battery-powered applications due to its wide input voltage range and efficiency.