Linear Technology/QD Devices
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LTC3896IFE

LTC3896IFE

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High Efficiency, Wide Input Voltage Range, Synchronous Buck-Boost DC/DC Converter
  • Package: 16-Lead TSSOP
  • Essence: Power management IC designed for various applications requiring a wide input voltage range and high efficiency.
  • Packaging/Quantity: Available in tape and reel packaging, with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 4V to 60V
  • Output Voltage Range: -0.5V to 60V
  • Switching Frequency: Up to 2MHz
  • Maximum Output Current: 3A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 125°C

Pin Configuration

The LTC3896IFE has the following pin configuration:

  1. VIN: Input Voltage
  2. PGND: Power Ground
  3. SW: Switch Node
  4. VOUT: Output Voltage
  5. FB: Feedback Voltage
  6. SS: Soft-Start
  7. GND: Signal Ground
  8. SYNC/MODE: External Clock Synchronization or Mode Selection
  9. RT/CLKOUT: Resistor Timing or Clock Output
  10. VCC: Supply Voltage
  11. EN/UVLO: Enable or Undervoltage Lockout
  12. OCSET: Overcurrent Limit Set
  13. SS/TRK: Soft-Start or Tracking
  14. PGOOD: Power Good Indicator
  15. COMP: Compensation
  16. BST: Bootstrap Capacitor Connection

Functional Features

  • Wide input voltage range allows operation from various power sources.
  • Synchronous buck-boost architecture enables efficient conversion across a wide range of input and output voltages.
  • High switching frequency capability provides compact solution and reduces external component size.
  • Integrated power switches simplify the design and reduce external component count.
  • Soft-start and tracking features enable controlled startup and sequencing of multiple converters.
  • Overcurrent protection ensures safe operation under fault conditions.
  • Power good indicator provides a signal indicating proper output voltage regulation.

Advantages

  • High efficiency results in reduced power dissipation and longer battery life.
  • Wide input voltage range allows for versatile application in different power systems.
  • Compact package size enables space-saving designs.
  • Integrated power switches simplify the circuit design and reduce component count.
  • Soft-start and tracking features enhance system reliability and performance.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Higher switching frequency may introduce additional noise in sensitive applications.
  • Requires careful consideration of thermal management due to high efficiency operation.

Working Principles

The LTC3896IFE is a synchronous buck-boost DC/DC converter that utilizes a combination of high-side and low-side power switches to efficiently step up or step down the input voltage. It employs a constant frequency, current mode control architecture to regulate the output voltage. The feedback voltage is compared with a reference voltage to generate the necessary control signals for the power switches. The integrated soft-start circuitry ensures a controlled startup, while the overcurrent protection prevents excessive current flow. The device also offers various operating modes, such as Burst Mode® operation, to optimize efficiency under light load conditions.

Detailed Application Field Plans

The LTC3896IFE is well-suited for a wide range of applications, including but not limited to:

  1. Battery-powered devices: Provides efficient power conversion for portable electronics, IoT devices, and handheld instruments.
  2. Automotive systems: Enables voltage regulation in automotive electronics, infotainment systems, and lighting applications.
  3. Industrial equipment: Suitable for powering motor drives, control systems, and industrial automation equipment.
  4. Telecommunications: Used in telecom infrastructure, base stations, and networking equipment.
  5. Renewable energy: Facilitates power conversion in solar energy systems, wind turbines, and energy storage applications.

Detailed and Complete Alternative Models

  1. LTC3896HFE: Higher maximum output current of 5A for more demanding applications.
  2. LTC3896LFE: Lower maximum output current of 1.5A for low-power applications.
  3. LTC3896XFE: Extended temperature range (-40°C to 150°C) for harsh environment applications.

These alternative models offer similar functionality with slight variations in specifications to cater to different application requirements.

Word count: 543 words

技術ソリューションにおける LTC3896IFE の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LTC3896IFE in technical solutions:

  1. Q: What is LTC3896IFE? A: LTC3896IFE is a high-performance synchronous buck-boost DC/DC controller IC manufactured by Linear Technology (now part of Analog Devices). It is commonly used in power management applications.

  2. Q: What is the input voltage range supported by LTC3896IFE? A: LTC3896IFE supports an input voltage range from 4V to 60V, making it suitable for a wide range of applications.

  3. Q: What is the output voltage range that can be achieved using LTC3896IFE? A: The output voltage range of LTC3896IFE depends on the external components used in the circuit. It can support both step-up and step-down conversions, allowing for a wide range of output voltages.

  4. Q: What is the maximum output current that LTC3896IFE can handle? A: LTC3896IFE can handle a maximum output current of up to 20A, making it suitable for high-power applications.

  5. Q: Can LTC3896IFE operate in both continuous and discontinuous conduction modes? A: Yes, LTC3896IFE can operate in both continuous and discontinuous conduction modes, providing flexibility in different load conditions.

  6. Q: Does LTC3896IFE have built-in protection features? A: Yes, LTC3896IFE has various built-in protection features such as overvoltage protection, undervoltage lockout, overcurrent protection, and thermal shutdown.

  7. Q: Can LTC3896IFE be synchronized with an external clock? A: Yes, LTC3896IFE can be synchronized with an external clock signal, allowing for better noise performance and synchronization with other components in the system.

  8. Q: What is the efficiency of LTC3896IFE? A: The efficiency of LTC3896IFE depends on the input and output voltage levels, as well as the load conditions. Generally, it can achieve high efficiencies above 90%.

  9. Q: Can LTC3896IFE be used in automotive applications? A: Yes, LTC3896IFE is suitable for automotive applications as it meets the necessary requirements such as wide input voltage range, robust protection features, and high reliability.

  10. Q: Are there any evaluation boards or reference designs available for LTC3896IFE? A: Yes, Analog Devices provides evaluation boards and reference designs for LTC3896IFE, which can help users quickly prototype and implement their power management solutions.

Please note that these answers are general and may vary depending on specific application requirements and design considerations.