LTC6912CDE-2
Product Overview
The LTC6912CDE-2 belongs to the category of precision operational amplifiers. It is commonly used in applications requiring high precision and low noise characteristics. The device comes in a small outline package (SOIC) and is designed to provide high accuracy and stability for various analog signal processing tasks.
Basic Information
- Category: Precision Operational Amplifier
- Use: High precision analog signal processing
- Characteristics: Low noise, high accuracy
- Package: Small Outline Package (SOIC)
- Essence: Providing stable and precise analog signal processing
- Packaging/Quantity: Available in reels of 2500 units
Specifications
- Supply Voltage: ±2.5V to ±18V
- Input Offset Voltage: 50µV max
- Gain Bandwidth Product: 10MHz
- Slew Rate: 3V/µs
- Operating Temperature Range: -40°C to 85°C
- Input Bias Current: 100pA max
Detailed Pin Configuration
The LTC6912CDE-2 features an 8-pin SOIC package with the following pin configuration: 1. OUT 2. V- 3. V+ 4. NC 5. NC 6. V- 7. V+ 8. IN-
Functional Features
- Low input offset voltage
- Low input bias current
- High gain bandwidth product
- Low noise performance
- Wide supply voltage range
Advantages and Disadvantages
Advantages
- High precision and accuracy
- Low noise operation
- Wide supply voltage range
- Small form factor package
Disadvantages
- Limited operating temperature range (-40°C to 85°C)
- Higher cost compared to standard operational amplifiers
Working Principles
The LTC6912CDE-2 operates based on the principles of precision analog signal processing. It utilizes a combination of low noise design techniques and high precision components to ensure accurate amplification and filtering of analog signals.
Detailed Application Field Plans
The LTC6912CDE-2 is well-suited for various applications including: - Sensor signal conditioning - Data acquisition systems - Instrumentation amplifiers - Precision filters - Test and measurement equipment
Detailed and Complete Alternative Models
Some alternative models to the LTC6912CDE-2 include: - AD8628 - OPA333 - LT1677 - MAX4239
In conclusion, the LTC6912CDE-2 is a precision operational amplifier designed to meet the demands of high accuracy and low noise analog signal processing applications. With its wide supply voltage range and small form factor, it offers a reliable solution for various precision analog signal processing needs.
Word Count: 386
技術ソリューションにおける LTC6912CDE-2 の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the LTC6912CDE-2?
- The LTC6912CDE-2 is a precision programmable gain amplifier designed for use in a variety of technical solutions.
What is the typical application of LTC6912CDE-2?
- The LTC6912CDE-2 is commonly used in instrumentation, industrial control, and sensor signal conditioning applications.
What is the input voltage range of LTC6912CDE-2?
- The input voltage range of LTC6912CDE-2 is typically ±10V.
What is the gain range of LTC6912CDE-2?
- The LTC6912CDE-2 has a gain range of 1 to 1000.
What is the power supply requirement for LTC6912CDE-2?
- The LTC6912CDE-2 operates from a single 5V to ±15V supply.
What are the key features of LTC6912CDE-2?
- Some key features include low offset voltage, low noise, high common mode rejection ratio (CMRR), and wide gain range.
How can LTC6912CDE-2 be programmed for different gains?
- The gain of LTC6912CDE-2 can be programmed using external resistors or through a digital interface.
What is the temperature range for LTC6912CDE-2?
- The LTC6912CDE-2 is specified to operate over the industrial temperature range of -40°C to 85°C.
Can LTC6912CDE-2 be used in battery-powered applications?
- Yes, the low power consumption of LTC6912CDE-2 makes it suitable for battery-powered applications.
Are there any application notes or reference designs available for LTC6912CDE-2?
- Yes, Linear Technology provides application notes and reference designs to assist with the implementation of LTC6912CDE-2 in various technical solutions.