Littelfuse Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
1.5KE110A-B
詳細を表示 DataSheets

1.5KE110A-B

Product Category

The 1.5KE110A-B belongs to the category of transient voltage suppressor (TVS) diodes.

Basic Information Overview

  • Use: The 1.5KE110A-B is designed to protect sensitive electronics from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.
  • Characteristics: It offers high surge capability, low clamping voltage, and fast response time.
  • Package: The 1.5KE110A-B is available in a DO-201 package.
  • Essence: Its essence lies in providing robust overvoltage protection for electronic circuits.
  • Packaging/Quantity: It is typically available in reels or bulk packaging with varying quantities.

Specifications

  • Peak Pulse Power: 1500W
  • Standoff Voltage: 94.5V
  • Breakdown Voltage: 105V
  • Clamping Voltage: 136V
  • Maximum Reverse Leakage Current: 1µA
  • Operating Temperature Range: -55°C to +175°C

Detailed Pin Configuration

The 1.5KE110A-B TVS diode has a standard axial lead configuration with two leads.

Functional Features

  • Provides transient overvoltage protection
  • Fast response time
  • Low clamping voltage
  • High surge capability

Advantages and Disadvantages

Advantages: - Effective protection against voltage transients - Fast response time - Wide operating temperature range

Disadvantages: - Higher cost compared to some alternatives - Requires careful consideration of placement in circuit design

Working Principles

When a transient voltage spike occurs, the 1.5KE110A-B TVS diode conducts heavily to divert the excess current away from the protected circuit, thus limiting the voltage across the circuit.

Detailed Application Field Plans

The 1.5KE110A-B is commonly used in applications such as power supplies, telecommunications equipment, automotive electronics, and industrial control systems where protection against voltage surges is critical.

Detailed and Complete Alternative Models

  • 1.5KE100A-B: Similar specifications with slightly lower breakdown voltage
  • 1.5KE120A-B: Similar specifications with slightly higher breakdown voltage
  • P6KE110A: Axial lead TVS diode with comparable characteristics

This comprehensive entry provides an in-depth understanding of the 1.5KE110A-B TVS diode, covering its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける 1.5KE110A-B の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of 1.5KE110A-B in technical solutions:

  1. What is the maximum peak pulse power dissipation of 1.5KE110A-B?

    • The maximum peak pulse power dissipation of 1.5KE110A-B is 1500 watts for a 10/1000μs waveform.

  2. What is the breakdown voltage of 1.5KE110A-B?

    • The breakdown voltage of 1.5KE110A-B is typically 110 volts.

  3. What is the operating temperature range of 1.5KE110A-B?

    • The operating temperature range of 1.5KE110A-B is -55°C to +175°C.

  4. What is the typical clamping voltage of 1.5KE110A-B?

    • The typical clamping voltage of 1.5KE110A-B is 148 volts at 100A.

  5. What are the typical applications for 1.5KE110A-B?

    • 1.5KE110A-B is commonly used in surge protection for sensitive electronics, such as telecommunications equipment, industrial control systems, and power supplies.

  6. Does 1.5KE110A-B meet industry standards for surge protection?

    • Yes, 1.5KE110A-B meets the requirements of various industry standards, including IEC 61000-4-5 for surge immunity testing.

  7. What package type does 1.5KE110A-B come in?

    • 1.5KE110A-B is available in a DO-201 package.

  8. What is the response time of 1.5KE110A-B?

    • The response time of 1.5KE110A-B is very fast, typically responding in less than 1 picosecond.

  9. Can 1.5KE110A-B be used for both AC and DC applications?

    • Yes, 1.5KE110A-B can be used for both AC and DC applications.

  10. What are the recommended mounting and soldering techniques for 1.5KE110A-B?

    • It is recommended to follow the guidelines provided in the datasheet for proper mounting and soldering techniques to ensure optimal performance and reliability.