Littelfuse Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
5KP58A-HR

5KP58A-HR Product Overview

Introduction

The 5KP58A-HR is a high-performance electronic component designed for use in electrical systems. This entry provides an in-depth overview of the product, including its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Category

The 5KP58A-HR belongs to the category of transient voltage suppressor (TVS) diodes. These diodes are widely used in electronic circuits to protect sensitive components from voltage spikes and transients.

Basic Information Overview

  • Use: The 5KP58A-HR is used to protect electronic circuits from overvoltage events.
  • Characteristics: It offers high surge capability, low clamping voltage, and fast response time.
  • Package: The product is available in a DO-201AD package.
  • Essence: Its essence lies in providing reliable overvoltage protection for electronic systems.
  • Packaging/Quantity: The 5KP58A-HR is typically packaged in reels or trays, with varying quantities based on customer requirements.

Specifications

  • Peak Power Dissipation: 5000W
  • Breakdown Voltage: 58V
  • Operating Temperature Range: -55°C to 175°C
  • Reverse Standoff Voltage: 49.9V
  • Maximum Clamping Voltage: 82.4V

Detailed Pin Configuration

The 5KP58A-HR features a standard DO-201AD package with two pins. Pin 1 is the cathode, while pin 2 is the anode.

Functional Features

  • Transient Voltage Suppression: Effectively suppresses transient voltage spikes to protect downstream components.
  • Fast Response Time: Rapidly responds to overvoltage events, minimizing the risk of damage to connected devices.
  • High Surge Capability: Capable of withstanding high surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Reliable overvoltage protection
  • High surge capability
  • Fast response time

Disadvantages

  • Higher cost compared to standard diodes
  • Requires careful consideration of reverse standoff voltage during design

Working Principles

When an overvoltage event occurs, the 5KP58A-HR conducts current and clamps the voltage to a safe level, diverting excess energy away from the protected circuit.

Detailed Application Field Plans

The 5KP58A-HR is commonly used in the following applications: - Power supply units - Automotive electronics - Industrial control systems - Telecommunication equipment

Detailed and Complete Alternative Models

  • 5KP6.8A-HR
  • 5KP10A-HR
  • 5KP15A-HR
  • 5KP24A-HR

In conclusion, the 5KP58A-HR is a crucial component in safeguarding electronic systems against overvoltage events. Its high surge capability, fast response time, and reliable performance make it an essential choice for various applications.

[Word Count: 426]

技術ソリューションにおける 5KP58A-HR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure, here are 10 common questions and answers related to the application of 5KP58A-HR in technical solutions:

  1. What is the voltage rating of 5KP58A-HR?

    • The voltage rating of 5KP58A-HR is 58 volts.

  2. What is the maximum peak pulse power of 5KP58A-HR?

    • The maximum peak pulse power of 5KP58A-HR is 5000 watts.

  3. What type of diode is 5KP58A-HR?

    • 5KP58A-HR is a transient voltage suppressor (TVS) diode.

  4. What are the typical applications of 5KP58A-HR?

    • Typical applications of 5KP58A-HR include overvoltage protection in electronic equipment, surge protection in power supplies, and transient voltage suppression in automotive systems.

  5. What is the response time of 5KP58A-HR?

    • The response time of 5KP58A-HR is very fast, typically in picoseconds.

  6. Is 5KP58A-HR suitable for high-reliability applications?

    • Yes, 5KP58A-HR is designed for high-reliability applications and has a high surge capability.

  7. Can 5KP58A-HR be used in outdoor environments?

    • Yes, 5KP58A-HR is suitable for outdoor use and can withstand harsh environmental conditions.

  8. Does 5KP58A-HR meet any specific industry standards?

    • Yes, 5KP58A-HR complies with industry standards such as AEC-Q101 for automotive applications.

  9. What is the operating temperature range of 5KP58A-HR?

    • The operating temperature range of 5KP58A-HR is typically from -55°C to +175°C.

  10. How should 5KP58A-HR be mounted in a circuit?

    • 5KP58A-HR should be mounted using appropriate techniques to ensure good thermal contact and low inductance connections.

I hope these questions and answers are helpful for your technical solutions! If you need further information, feel free to ask.